JVC GR-DVM828 manual Connect AC Charger Station to TV or VCR

1 CONNECT AC CHARGER STATION TO TV OR VCR

Connect as shown in the illustration (☞ pg. 56).

If Using A VCR	go to step 2.
If not	go to step 3.

2 CONNECTINPUT VCR OUTPUT TO TV

Refer to your VCR’s instruction manual.

3 TURN ON POWER

4 SELECT TV’S VIDEO MODE

Set the TV to the channel or mode appropriate for video playback.

To choose whether or not the following displays appear on the connected TV . . .

• Date/Time, Time Code

.... set to “ON” or “OFF” in the Playback Menu

(☞ pg. 52).

• Playback Sound Mode Display

.... set the Power Dial to “ M ”, press the MENU

button, and set “ON SCREEN” in the Date/ Time Menu (☞ pg. 11) to “ON” or “OFF”. Then set the Power Dial back to “PLAY”.

EN57

NOTES:

●Never connect any VIDEO/AUDIO cable or S- VIDEO cable other than those provided to the AC Charger Station’s connectors.

●When using the provided VIDEO/AUDIO cable, S-VIDEO cable or editing cable, make sure you connect the end of the cable with the core filter to the camcorder. The core filter improves perform- ance of equipment.

●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.

●To keep the camcorder’s display from appearing on the TV screen during playback, press the IND.ON/OFF button for longer than 1 second.