JVC GR-DVM828 manual Symptom Possible Causes

							EN	73
SYMPTOM		POSSIBLE CAUSES			CORRECTIVE ACTION
27. During recording, the	27. •“DISPLAY” is set to “OFF” in			27. •Set “DISPLAY” to “ON” in
date/time does not appear.		the Date/Time Menu.			the Date/Time Menu
		•Interface shooting is			(☞ pg. 11).
		performed.			•During interface shooting,
					the date/time does not
					appear (☞ pg. 23).
					•Press the IND.ON/OFF
					button for longer than 1
					second to make the
					indicators appear
					(☞ pg. 22).
28. The indicators and	28. •“ON SCREEN” is set to			28. •Set “ON SCREEN” to “ON”
messages do not appear		“OFF” in the Date/Time			in the Date/Time Menu
on screen.		Menu.			(☞ pg. 25).
					•Press the IND.ON/OFF
					button for longer than 1
					second to make the
					indicators appear
					(☞ pg. 22).
29. The indicators do not	29. •You have made the indica-			29. •Press the IND.ON/OFF
appear on the LCD		tors disappear.			button for longer than 1
monitor or in the					second to make the
viewfinder.					indicators appear
					(☞ pg. 22).
30. Images on the LCD	30. •In places subject to low			30. •Adjust the brightness and
monitor appear dark or		temperature, images become			angle of the LCD monitor
whitish.		dark due to the characteristics			(☞ pg. 22, 23).
		of the LCD monitor. When
		this happens, the displayed
		colours differ from those that
		are actually recorded. This is
		not a defect of the camcorder.
		•When the LCD monitor’s
		fluorescent light reaches the
		end of its service life, images
		on the LCD monitor become
		dark. Consult your nearest
		JVC dealer.
31. The rear of the LCD	31. •The light used to illuminate			31. •Close the LCD monitor to
monitor is hot.		the LCD monitor causes it to			turn it off or set the Power
		become hot.			Dial to “OFF”, and let the
					unit cool down.
32. The indicators and the	32. •This may occur when the			32.
image colour on the LCD		surface or the edge of the				————
monitor are not clear.		LCD monitor is pressed.
33. Images on the LCD	33. •The speaker volume is too			33. •Turn the speaker volume
monitor are jittery.		great.			down (☞ pg. 49).
34. The LCD monitor and the	34.			34. •Wipe them gently with soft
lens have become dirty			————		cloth. Wiping strongly can
(ex. fingerprints).					cause damage.

35. The LCD monitor	35. •Certain FADE/WIPE, P.AE/
indications blink.	Effects, DIS and other
	functions that cannot be
	used together are selected at
	the same time.

35.•Re-read the sections covering FADE/WIPE, P.AE/ Effects and DIS (☞ pgs. 32, 35 – 42).

CONTINUED ON NEXT PAGE