72
EN
TROUBLESHOOTING
(Cont.)
SYMPTOM | POSSIBLE CAUSES | CORRECTIVE ACTION |
18.The Picture Wipe and Dissolve functions don’t work.
18.•The last selected editing scene is ending.
•At the end of the last selected scene for editing, the Power Dial was set to “OFF”.
•The power is off.
18.• Select Picture Wipe or Dissolve before beginning recording. The effects are then automatically activated (☞ pg. 37).
•Do not turn off the camcorder’s power after setting
•The camcorder automati- cally shuts off after 5 minutes have elapsed in the
19. The Picture Wipe function | 19. | •The Slow Shutter effect is | 19. | • Make sure the Squeeze |
doesn’t work. |
| activated. |
| mode, Cinema mode, or |
|
| •The Squeeze or Cinema |
| Slow Shutter effect is not |
|
| mode is selected in the |
| activated when preparing to |
|
| Recording Menu. |
| use the Picture Wipe |
|
|
|
| function (☞ pg. 31, 42). |
20. Even when Slow Shutter | 20. | •When shooting in the dark, | 20. | • If you want the lighting to |
isn’t selected, the image |
| the unit becomes highly |
| look more natural, set GAIN |
looks like it is activated. |
| sensitive to light and the |
| UP to “AGC” or “OFF” in |
|
| image takes on an effect |
| the Recording Menu |
|
| similar to Slow Shutter. |
| (☞ pg. 32). |
21. There is no strobe when | 21. | •The Picture Wipe or Dissolve | 21. | • Do not try to use the Classic |
the Classic Film or Strobe |
| function is in use. |
| Film or Strobe effect during a |
effect is activated. |
|
|
| scene transition (☞ pg. 42). |
22. White Balance cannot be | 22. | •The Sepia or Monotone | 22. | • Turn off Sepia or Monotone |
activated. |
| effect is activated. |
| before setting White |
|
|
|
| Balance (☞ pg. 41). |
23. When shooting a subject | 23. | •This is a result of exceed- | 23. |
|
illuminated by bright light, |
| ingly high contrast, and is |
| |
vertical lines appear. |
| not a malfunction. |
|
|
24. When the screen is under | 24. | •This is not a malfunction. | 24. |
|
direct sunlight during |
|
|
|
|
shooting, the screen |
|
|
| |
becomes red or black for |
|
|
|
|
an instant. |
|
|
|
|
25. There are disturbances in | 25. | •If Audio Dubbing has | 25. | • Use a new, or infrequently |
audio. |
| been performed |
| used, tape for Audio |
|
| repeatedly on the same |
| Dubbing (☞ pg. 68, 69). |
portion of the tape, disturbance to the sound may result.
26.During recording, sound 26. •The optional headphones are
cannot be heard. | not connected to the |
| headphones connector. |
| •The sound volume of the |
| headphones connector was |
| not adjusted appropriately. |
| The sound volume at this |
| point is the same as the level |
| it was adjusted to during |
| playback. |
|
|
26.• Connect the optional headphones to the head- phones connector
(☞ pg. 76).
•Adjust the sound volume during playback
(☞ pg. 49).