RECORDINGAdvancedFeaturesEN23
[Ex.: Fader]
Fade in
Fade/Wipe
These effects let you make
Display
MOSAIC
1 SELECT OPERATION MODE Set the Power Switch to “PRO.”.
Fade out 2 ENGAGEMODE FADE- OR WIPE-STANDBY
Press EFFECT to cycle through the modes as shown at
After 2 sec.left. Once the desired mode appears, it is selected and reserved.
•The selected mode’s name and its indication are displayed for approx. 2 seconds. Then the name disappears, and only the indication remains.
3 START OR END RECORDING
Press the Recording Start/Stop Button to activate fade- in/out or
|
|
|
|
|
| FADER |
| |
|
|
|
|
|
| |||
|
|
|
|
|
| MOSAIC | ||
|
|
|
|
|
| |||
|
|
|
|
|
| SHUTTER | ||
|
|
|
|
|
| |||
|
|
|
|
|
| SLIDE | ||
|
|
|
|
|
| |||
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
OFF |
|
| OFF |
|
| |||
|
| |||||||
(No indication) |
|
|
|
|
4 TOMODECANCEL FADE- OR WIPE-STANDBY
Press EFFECT repeatedly until “OFF” appears.
•“OFF” is displayed for approx. 2 seconds and the fade/wipe standby mode is canceled.
FADER
Fades in/out to a black screen.
MOSAIC (Fader)
Gradually turns/returns the picture into/from a mosaic pattern.
SHUTTER (Wipe)
A black screen moves in from the top and bottom, closing over the image like a shutter, or a new image pushes open the black screen vertically from the centre.
SLIDE (Wipe)
A black screen moves in from the left to gradually cover the image, or a new image moves in from right to left.
EFFECT Button | Power |
| Switch |
NOTES:
●Pressing and holding the Recording Start/Stop Button allows you to vary the length for the image during fade in/out or wipe in/out.
●The screen becomes slightly reddish when the Fade/ Wipe is used with Sepia (☞ pg. 25).
●With the Electronic fog filter mode (☞ pg. 25) engaged, the image fades in/out to a white screen.
Recording Start/Stop Button