EN13
|
| Shoulder Strap Attachment | |
|
| ATTACH STRAP | |
|
| 1 Following the illustration on left, thread the strap | |
1 |
| through the top of the eyelet 1, then fold it back and | |
| thread it through the buckle 2. Repeat the procedure | ||
| 4 | to attach the other end of the strap to the other eyelet | |
2 | 3, making sure the strap is not twisted. | ||
| |||
| ADJUST LENGTH | ||
|
| ||
3 |
| 2 Adjust as shown in the illustration on left 4. |
Tripod Mounting
1 ALIGN AND TIGHTEN
Align the screw and camera direction stud on the tripod with the camera’s mounting socket and stud hole. Then tighten the screw.
CAUTION:
When using a tripod, be sure to open and extend its legs fully to stabilise the camcorder. To prevent damage to the unit caused by falling over, do not use a