JVC GR-FXM45 Self-Timer, Access INT. Time Menu, SET Interval Time, Start Delayed Recording

36EN

RECORDINGAdvancedFeatures(cont.)

Self-Timer

You can set the delay between pressing the Recording Start/Stop button and the actual start of recording. If you secure the camcorder, you (or whoever is operating the camcorder) can enter the scene before recording starts.

NOTE:

Make sure the Power Switch is set to “PRO.” and the camcorder is in the Record-Standby mode before performing the following steps.

MENU Button

1 ACCESS MENU SCREEN

Press MENU.

2 ACCESS “INT. TIME” MENU

Rotate the Select Dial to move the highlight bar to “NEXT” in Menu Screen 1 and press it to display Menu Screen 2. Then, move the highlight bar to “INT. TIME” and press it.

Select Dial

Display

4NEXT

M. W. B. AUTO

D . ZOOM ON TELE MACRO OFF DATETIME TAPE LENGTH T45

Recording Start/Stop Button

Menu Screen 1

3 SET INTERVAL TIME

Rotate the Select Dial to move the highlight bar to the desired time, then press it. The Menu Screen reappears with the highlight bar on “RETURN”.

4 CLOSE MENU SCREEN

Press the Select Dial.

5 START DELAYED RECORDING

4RETURN

Press the Recording Start/Stop Button. When the selected time has elapsed, recording begins auto- matically.

4BACK

REC. TIME OFF

INT. TIME OFF TALLY LAMP ON JLIP ID NO 06 DEMO MODE OFF

4RETURN

Menu Screen 2
To Cancel Self-Timer . . .
.... Before the recording begins, press the Recording Start/
Stop Button to display “	”, then set “INT.

TIME” in the Menu Screen to “OFF”.

INT. TIME

OFF 15S 30S

1MIN

5MIN

EXIT

REC TIME

OFF 14S 12S

1S

5S

EXIT

INT. TIME Menu

15S 1S

REC TIME Menu

INT. TIME indicator

REC TIME indicator

INT. TIME and REC TIME indications on the normal screen