JVC GR-FXM45 specifications Using AC Power, Using a CAR Battery

Page 7

 

 

 

EN

 

7

 

 

 

 

 

 

Charge Marker

 

Charge marker

A charge marker is provided on the battery pack to

 

 

 

help you remember whether it has been charged or

 

 

not. Two colours are provided (red and black)—you

choose which one means charged and which means discharged.

NOTES:

●The recording time per charge is affected by such factors as the time spent in Record-Standby mode and the frequency of zooming. It is safer to have spare battery packs to cover 3 times the planned shooting time.

●Charging times noted on page 6 are for a fully discharged battery pack, and discharging times are for a fully charged battery pack.

●Charging and discharging times vary according to the ambient temperature and the status of the battery pack.

●Remember to set the charge marker after charging a battery pack or after detaching a discharged one from your camcorder.

●Perform the REFRESH function after no less than 5 chargings.

●While the AC Power Adapter/Charger’s power cord is disconnected from the AC outlet, it is possible to discharge the battery by pressing the REFRESH switch. During that time, the AC Power Adapter/Charger does not charge the battery. When discharging is complete, detach the battery from the AC Power Adapter/ Charger to store it.

●High temperatures can damage the battery pack, so use only where good ventilation is available. Do not allow it to discharge in a container, such as a bag.

●If you stop recharging or discharging part way through, make sure to remove the battery pack before unplugging the adapter’s AC cord.

●Remove the battery pack from the adapter immediately after discharging.

●To avoid interference with reception, do not use the AC Power Adapter/Charger near a radio.

●Make sure you unplug the DC cord before charging or discharging the battery pack.

●The CHARGE indicator may not light properly with a brand new battery pack, or with one that has been stored for an extended period. In this case, remove and reattach the battery pack and recharge it. The CHARGE indicator should blink during recharging. If not, contact your nearest JVC dealer.

To DC IN jack

To AC outlet

DC OUT terminal

DC Cord

AC Power

Adapter/Charger

 

 

AA-V15EA

 

To car’s

 

cigarette

 

lighter

 

socket

Car Battery

Charger/Adapter

BH-V3E (optional)

USING AC POWER

Use the AC Power Adapter/Charger (connect as shown in the illustration).

NOTES:

●The provided AC Power Adapter/Charger features automatic voltage selection in the AC range from 110 V to 240 V.

●When using the DC cord, make sure you connect the end of the cord with the core filter to the camcorder. The core filter reduces interference.

USING A CAR BATTERY

Use the optional Car Battery Charger/Adapter (connect as shown in the illustration).

NOTES:

●When using the car battery, leave the engine idling.

●The optional Car Battery Charger/Adapter (BH-V3E) can also be used to charge the battery pack (except BN-V20U/V856U).

●When using the optional Car Battery Charger/ Adapter, refer to the respective instruction booklet.

Page 6 Page 8
Image 7
Page 6 Page 8
Contents GR-FXM45 GR-FXM15 It is recommended that you Dear CustomerHagemeyer NZ Limited P.O. Box 100589 Auckland Phone 09415 Rechargeable BatteriesDC Cord Shoulder Strap Cassette Adapter C-P7U Zoom Zoom outQuick Operation Guide EN5 Slide Battery Release and pull out the battery packCharging the Battery Pack PowerUsing the Battery Pack Using a CAR Battery Using AC PowerChoose which one means charged and which means discharged Insert Battery in Holder Clock Lithium Battery Insertion/RemovalSwitch OFF Power Remove Battery HolderDate/Time Settings Cont Recording Mode SettingTape Length Setting SET Recording ModeClose Cassette Holder Loading/Unloading a CassetteOpen LCD Monitor Open Cassette HolderViewfinder Adjustment Grip AdjustmentAttach Strap Adjust LengthShoulder Strap Attachment Tripod MountingStart Shooting Power Switch PositionBasic Recording Load a CassetteStop Recording LCD Monitor/Viewfinder IndicationsPress Display Button Shooting While Watching The LCD Monitor Recording Basic RecordingBefore the following steps, perform pg Interface Shooting Journalistic ShootingBrightness Control Push the Power Zoom Lever towards T EN Recording Basic FeaturesZoom To check the end of the last recording Feature Quick ReviewTo re-record certain segments Press P.STABILIZER. appears Basic FeaturesFeature Picture Stabilizer Feature 5Sec. Rec 5-sec. Recording GR-FXM15 onlyTo brighten the scene when natural lighting is too dim Feature Video Light GR-FXM45 onlyIf you press during Record-Standby Recording Advanced FeaturesSnapshot GR-FXM45 only Take SnapshotStart or END Recording Recording Advanced Features EN23Tomodecancel FADE- or WIPE-STANDBY Fade/WipePress P.AE to cycle through the modes as shown on the left Advanced FeaturesSelect Mode Programme AE With Special EffectsColours of a picture are reversed Display ModeNega Posi mode High shutter speed clearly captures fast-moving actionPress the Select Dial to display the Menu Screen Date/Time InsertInstant Titles Access Title MenuMake Setting Using Menu For Detailed AdjustmentEND Setting Menu Screen Available Using The Menu Button Menu Screen Available Using The Select DialMenu Screen Explanations Recording pg Tally lamp comes on to signal the start of recordingDemo Mode is set to on and the Menu Screen is closed Allows you to set the current date and time pgExposure Control Access Exposure MenuTo darken the image Auto Focus FocusingPatterns that are regularly repeated Manual Focus Access Focus MenuAccess Manual Focus END Adjustment of FocusTo Return To Automatic White Balance White Balance AdjustmentAccess White Balance Adjustment SET Function ParametersTo Change The Tint For Recording Enter SettingManual White Balance Operation Press the Select Dial again to close the Menu ScreenSET Interval Time Self-TimerAccess INT. Time Menu Start Delayed RecordingTime-Lapse AnimationStop Playback Playback Basic PlaybackRewind or Fast-Forward the tape Play BackTracking Speaker Volume ControlAdjust Volume If you want to turn up the volumeFeature Counter Memory Function Playback FeaturesFeature Still Playback Feature Shuttle SearchInsert Battery Using The Cassette Adapter EN41Cassette Adapter Connection For Tape Dubbing When connecting the cables, open this coverBasic Connections And Tape Dubbing Basic ConnectionsTape Dubbing Functions Installing The BatteryPull OUT Battery Holder RM-V700U Provided with GR-FXM45 Optional for GR-FXM15Time-Lapse Feature Self-Timer, Animation and Time-LapseSelf-Timer AnimationOperate VCR SET REMOTE/VCR CodeYou are now ready to try Random Assemble Editing Prepare Camcorder Make ConnectionsJVC VCR Equipped with Remote Pause Terminal VCR Other than Type orAt the bottom of the screen Select ScenesStart Source Playback Register END of SceneEND Automatic Editing Automatic Editing to VCRPrepare Source Tape Begin Automatic EditingBegin Insert Editing Reset CounterInsert Editing Find EDIT-OUT PointBegin Audio Dubbing Audio DubbingEND Audio Dubbing After Use Cleaning The CamcorderAvailable No power is suppliedRecording does not start Animation or Time-Lapse is notTape will not eject An error number i.e. E03 appearsReview or Retake mode During recording, the indications do not appearClock Battery Warning Programme AE IndicatorFade/Wipe-Standby Indicator By pressing EFFECT, then only the indicator56EN Counter Reset/Memory Button Dioptre Adjustment Control Lens Cover Open/Close RingVideo Light Switch Light OFF/AUTO/ON Speaker Volume Control VOL Picture Stabilizer ButtonDarken The LCD Monitor High Speed Shutter Mode ......................... pgRemote Control Pg , 7During use For safety, do notAvoid using the unit To avoid hazardTo protect the unit, do not To prolong service lifeCleaning the video heads Do not leave the unitProvided Accessories Optional Accessories ConnectorsGeneral Memo Memo GR-FXM15
Top Page Image Contents