EN11
Shoulder Strap Attachment
1 | 1 |
2 | 4 |
| |
3 | 2 |
|
ATTACH STRAP
Following the illustration at left, thread the strap through the top of the eyelet 1, then fold it back and thread it through the buckle 2. Repeat the procedure to attach the other end of the strap to the other eyelet 3, making sure the strap is not twisted.
ADJUST LENGTH
Adjust as shown in the illustration at left 4.
GETTING STARTED
Tripod Mounting
1 ALIGN AND TIGHTEN
Align the screw and camcorder direction stud on the tripod with the camcorder’s mounting socket and stud hole. Then tighten the screw.
CAUTION:
When using a tripod, be sure to open and extend its legs fully to stabilise the camcorder. To prevent damage to the unit caused by falling over, do not use a