LIGHT OFF/AUTO/ON
Switch
DANGER
■The video light can become extremely hot. Do not touch it either while in operation or soon after turning it off, otherwise serious injury may result.
■Do not place the camcorder into the carrying case immediately after using the video light, since it remains extremely hot for some time.
■When operating, keep a distance of about 30 cm. between the video light and people or objects.
■Do not use near flammable or explosive materials.
■It is recommended that you consult your nearest JVC dealer for replacing the video light.
EN17
FEATURE: Quick Review
PURPOSE:
To check the end of the last recording.
OPERATION:
1)Press “ ” and release quickly during the Record– Standby mode.
■Tape is rewound for about 2 seconds and played back automatically, then pauses in
NOTE:
Distortion may occur at the start of playback. This is normal.
FEATURE: Video Light |
| ||
RECORDING | |||
|
| ||
1) Set the LIGHT OFF/AUTO/ON Switch as required: | |||
PURPOSE: |
| ||
To brighten the scene when natural lighting is too dim. |
| ||
OPERATION: |
| ||
OFF : Turns off the light. |
| ||
AUTO : Automatically turns on the light when the |
| ||
camcorder senses insufficient lighting on the |
| ||
subject. |
| ||
ON : Always keeps the light on as long as the |
| ||
camcorder is turned on. |
| ||
■ The video light can only be used with the |
| ||
camcorder’s power on. |
| ||
■ It is recommended to set the white balance |
|
(☞ pg. 30) to when you use the video light.
■When not using the video light, turn it off to save battery power.
NOTES:
● Even if the battery indicator ( ) does not blink if the battery pack’s charge is low, the camcorder may turn off automatically when you turn on the video light, or when you start recording with the video light turned on.
●When the LIGHT OFF/AUTO/ON Switch is set to “AUTO”:
•Depending on the lighting conditions, the video light may keep turning on and off. In this case, manually switch the light on or off using the LIGHT OFF/AUTO/ON switch.
•While the “Sports” or “High Speed Shutter” mode (☞ pg. 21) is engaged, the light is likely to stay on.
•While the “Twilight” mode (☞ pg. 21) is engaged, the light will not activate.