JVC GR-FXM55, GR-FXM35 manual Power, Charging the Battery Pack, Using the Battery Pack

Page 4

4EN

Marks

To AC outlet

CHARGE indicator

REFRESH switch

REFRESH indicator

REFRESH

The AC Power Adapter/Charger features a REFRESH function that allows you to fully discharge the battery pack before recharg- ing.

Perform the REFRESH function after no less than 5 chargings.

To discharge the battery . . .

.... attach the battery pack to the adapter as

shown in the above illustration. Then push REFRESH. The REFRESH indicator lights when discharging starts, and goes out when discharging is complete.

GETTINGSTARTED

Power

This camcorder’s 3-way power supply system lets you choose the most appropriate source of power.

NOTES:

●No function is available without power supply.

●Use only the specified power supply.

●Do not use provided power supply units with other equipment.

CHARGING THE BATTERY PACK

1 SUPPLY POWER

Connect the charger’s AC power cord to a wall outlet.

2 ATTACH BATTERY PACK

Align the marks and slide the battery pack in the direction of the arrow until it locks in place.

•The CHARGE indicator begins blinking to indicate charging has started.

DETACH BATTERY PACK

 

3 When the CHARGE indicator stops blinking but stays lit,

charging is finished. Slide the battery pack opposite the

direction of the arrow.

 

 

 

 

 

Battery pack

Charging time

 

Discharging time

BN-V12U

approx. 1 hr. 10 min.

 

approx. 3 hrs. 30 min.

BN-V20U

approx. 1 hr. 50 min

 

approx. 6 hrs. 40 min.

 

 

 

 

AHook on.

B Push in.

BATTERY RELEASE

ATTENTION:

Before detaching the power source, make sure that the camcorder’s power is turned off. Failure to do so can result in a camcorder malfunction.

USING THE BATTERY PACK

ATTACH BATTERY PACK

1 Hook its end to the camcorder (

) and push the battery

pack in until it locks in place (

) .

DETACH BATTERY PACK

 

2 Slide BATTERY RELEASE and pull out the battery pack.

Approximate recording time (unit: min.)

 

 

 

 

 

 

 

LCD

LCD

 

LCD

Battery pack

monitor on/

monitor off/

monitor on/

 

Viewfinder off

Viewfinder on

Viewfinder on

BN-V12U

60 (35)

65

(40)

50 (35)

 

 

 

 

 

BN-V20U

95 (60)

105

(65)

85 (55)

 

 

 

 

 

( ): when the video light is on.

INFORMATION:

VU-V856KIT is a set composed of the BN-V856U battery pack and AA-V80EG AC Power Adapter/Charger.

The BN-V856U battery pack provides approx. 7 hours of recording time when the viewfinder is on and the LCD monitor and the video light are off. Also read thoroughly the VU-V856KIT’s instruction manuals.

It is impossible to charge the BN-V856U battery pack using the provided AC Power Adapter/Charger. Use the optional AA-V80EG AC Power Adapter/Charger.

Page 3 Page 5
Image 4
Page 3 Page 5
Contents GR-FXM55 GR-FXM35 It is recommended that you Crossed Out Dust BinMajor Features Contents EN3 Charging the Battery Pack PowerUsing the Battery Pack Using a CAR Battery Using AC PowerDischarged Switch OFF Power Remove Battery HolderInsert Battery in Holder RE-INSERT HolderDate/Time Settings Tape Length Setting First set the Power Switch to PRO.. Press MenuSET Tape Length Dial again to close the Menu ScreenLoading/Unloading a Cassette Viewfinder Adjustment Grip Adjustment10 EN Adjust Length Shoulder Strap AttachmentTripod Mounting Attach StrapPower Switch Position 12 ENRecording Basic Recording Load a CassetteLCD Monitor/Viewfinder Indications Stop RecordingPress Display Button RecordingPower Switch Recording Start/Stop Button Power lamp 14 ENShooting While Watching The LCD Monitor Before the following steps, perform pgInterface Shooting Journalistic ShootingBrightness Control Basic Features Push the Power Zoom Lever towards TZoom Zoom OutFeature Quick Review Feature Video LightSet the Light OFF/AUTO/ON Switch as required To brighten the scene when natural lighting is too dimFeature Picture Stabilizer Feature 5 Sec. Rec 5-sec. RecordingPress P.STABILIZER. appears SEC. REC Button Stabilizer Button DisplayRecording Advanced Features EN19 Tomodecancel FADE- or WIPE-STANDBYFade/Wipe Modeengage FADE- or WIPE-STANDBYAdvanced Features Select Mode20 EN Programme AE With Special EffectsDisplay Mode Nega Posi modeHigh shutter speed clearly captures fast-moving action Colours of a picture are reversedRecording Advanced Features 22 ENDate/Time Insert Press the Select Dial to display the Menu ScreenSelect the Desired Mode Access Title MenuInstant Titles Using Menu For Detailed Adjustment Make SettingEND Setting 24 ENMenu Screen Available Using The Menu Button Menu Screen Available Using The Select DialMenu Screen Explanations 26 EN Access Exposure Menu Access Manual ExposureAdjust Exposure END Adjustment of ExposureFocusing 28 ENAuto Focus Patterns that are regularly repeatedAccess Focus Menu Access Manual FocusAdjust Focus END Adjustment of FocusWhite Balance Adjustment Access White Balance Adjustment30 EN SET Function ParametersEnter Setting Manual White Balance OperationSET Manual White Balance To Change The Tint For RecordingSelf-Timer Access INT. Time MenuStart Delayed Recording 32 ENAnimation Time-Lapse34 EN Playback Basic PlaybackRewind or Fast-Forward the tape Play BackSpeaker Volume Control Adjust VolumeTracking Activate Manual TrackingPlayback Features Feature Still PlaybackFeature Shuttle Search Feature Counter Memory FunctionUsing The Cassette Adapter EN37 Insert BatteryRecording safety hole Cassette Adapter38 EN Basic Connections And Tape DubbingBasic Connections Connection For Tape DubbingTape Dubbing Installing The Battery Pull OUT Battery HolderRemote control uses one lithium battery CR2025 40 ENFeature Self-Timer, Animation Time-Lapse Self-TimerAnimation Time-LapseCreate edited videos easily using your camcorder as 42 ENSET REMOTE/VCR Code Operate VCRMake Connections JVC VCR Equipped with Remote Pause TerminalVCR Other than Type or Prepare Camcorder44 EN Select ScenesStart Source Playback Register END of SceneHow to use Supplemental Information on the Remote ControlAutomatic Editing to VCR 46 EN Insert EditingAudio Dubbing Begin Audio DubbingEND Audio Dubbing Remote sensor Microphone48 EN An error number i.e. E03 appears During recording, the indications do not appearTape will not eject Some functions are not availableIndex Controls, Connectors And Indicators 50ENDioptre Adjustment Control Lens Cover Open/Close Ring Video Light SwitchSpeaker Volume Control VOL Picture Stabilizer Button $ MENU/DISPLAY Button Counter Reset/Memory ButtonEN Index Indications For safety, do not To avoid hazardDuring use Store cassettesAvoid using the unit To prolong service lifeCleaning The Camcorder Do not leave the unitProvided Accessories Optional Accessories ConnectorsGeneral GR-FXM35
Top Page Image Contents