JVC GR-FXM35 manual Recording Advanced Features EN19, Fade/Wipe, Modeengage FADE- or WIPE-STANDBY

RECORDINGAdvancedFeaturesEN19

[Ex.: Fader]	Fade/Wipe
Fade in	These effects let you make pro-style scene transitions.
	Fade- or wipe-in works at recording start, and fade- or
	wipe-out works at recording end or when you enter
	Record–Standby mode.

Display

MOSAIC

			SELECT OPERATION MODE
		1 Set the Power Switch to “PRO.”.
	Fade out
		2	MODEENGAGE FADE- OR WIPE-STANDBY
After 2 sec.			Press EFFECT to cycle through the modes as shown at
			left. Once the desired mode appears, it is selected
			and reserved.
			•The selected mode’s name and its indication are
			displayed for approx. 2 seconds. Then the name
			disappears, and only the indication remains.

		FADER
		MOSAIC
		SHUTTER
		SLIDE
OFF	OFF
(No indication)

3 START OR END RECORDING

Press the Recording Start/Stop Button to activate fade- in/out or wipe-in/out.

4 TOMODECANCEL FADE- OR WIPE-STANDBY

Press EFFECT repeatedly until “OFF” appears.

•“OFF” is displayed for approx. 2 seconds and the fade/wipe standby mode is canceled.

FADER

RECORDING

Fades in/out to a black screen.

EFFECT Button	Power
	Switch

Recording Start/Stop

Button

MOSAIC (Fader)

Gradually turns/returns the picture into/from a mosaic pattern.

SHUTTER (Wipe)

A black screen moves in from the top and bottom, closing over the image like a shutter, or a new image pushes open the black screen vertically from the centre.

SLIDE (Wipe)

A black screen moves in from the left to gradually cover the image, or a new image moves in from right to left.

NOTES:

●Pressing and holding the Recording Start/Stop Button allows you to vary the length for the image during fade in/out or wipe in/out.

●The screen becomes slightly reddish when the Fade/ Wipe is used with Sepia (☞ pg. 21).

●With the Electronic fog filter mode (☞ pg. 21) engaged, the image fades in/out to a white screen.