QUICK
OPERATION
GUIDE
EN5
SUPPLY POWER |
| INSERTING A VIDEO CASSETTE |
AHook on.
B Push in.
BATTERY RELEASE
Using the battery pack
Hook its end to the camcorder (
) and push the battery pack in until it locks in place ( 
). (Charging procedure, ☞ pg. 6)
To remove the battery pack
Slide BATTERY RELEASE and pull out the battery pack.
4PUSH Button
3 
1 2
EJECT Switch
1Open the LCD monitor to an angle of over 60 degrees.
2Slide EJECT to open the cassette holder.
3 Insert a video cassette.
4Press PUSH to close the cassette holder. (For more details, ☞ pg. 11)
PLAYBACK
2REW (2) Button
| 3 | 1 |
STOP | PLAY/PAUSE | |
(5) Button | (4/6) Button | Set to “PLAY” |
|
|
1Set the Power Switch to “PLAY”.
2Press REW (2).
—The tape will automatically stop at the beginning of the tape.
3Press PLAY/PAUSE (4/6).
—Playback starts and the playback picture appears.
•To stop playback, press STOP (5). (For more details, ☞ pg. 36)
•The viewfinder switches off automatically to save power when the LCD monitor is opened at an angle of over 60 degrees.
•The LCD monitor turns on/off when it is opened/closed at approx. 60 degrees.
Or simply play back the tape on a VHS VCR using the Cassette Adapter ☞ pg. 39
SHOOTING
1
LENS COVER
Open/Close Ring
2
Set to “AUTO” or “PRO.”
3Recording Start/Stop Button
1 Turn the LENS COVER Open/Close Ring to open the lens cover.
2Set the Power Switch to “AUTO” or “PRO.”.
—The power lamp will light and an image will appear.
3Press the Recording Start/Stop Button.
— Recording starts.
•To stop recording temporarily, momentarily press the Recording Start/Stop Button once again.
(For more details, ☞ pgs. 14, 15)
•The viewfinder switches off automatically to save power when the LCD monitor is opened at an angle of over 60 degrees.
•The LCD monitor turns on/off when it is opened/closed at approx. 60 degrees.