4EN
AUTOMATIC DEMONSTRATION
Automatic Demonstration takes place when “DEMO MODE” is set to “ON”
■Available when the Power Switch is set to “” or “ ”.
■Operating the Power Zoom Lever during the demonstration stops the demonstration temporarily. If the Power Zoom Lever is not moved for more than 1 minute after that, the demonstration will resume.
■“DEMO MODE” remains “ON” even if the camcorder power is turned off.
■To cancel Automatic Demonstration, set the Power Switch to “ ” and press the MENU Wheel in while the demo is in progress. This takes you directly to the demo mode’s Setting Menu (so you will not have to go through the main Menu Screen). Rotate the MENU Wheel to select “OFF” and press it.
DEMO MODE
OF F
ON
EX I T
Setting Menu
NOTES:
●When a tape whose Erase Protection tab is in the position that allows recording is loaded in the camcorder, demonstration is not available.
●If you do not detach the Lens Cap, you cannot see the actual changes of the Automatic Demonstration activated on the LCD monitor or viewfinder.
PROVIDED ACCESSORIES
•AC Adapter | •Cassette Adapter | |
(VHS Playpak) | ||
| •Remote Control Unit | |
•Battery Pack |
| |
| ||
| ||
SXM347UM/SX877UM | ||
| ||
| only) |
•AAA (R03) Battery x 2
(for Remote Control Unit,
•Shoulder Strap
SXM347UM/SX877UM
only)
•Lens Cap | •AA (R6) Battery | |
(for Cassette Adapter) | ||
|