DEMO MODE
Demonstrates certain functions automatically. Available when the Power Switch @ is set to “ ” or “ 
” and “DEMO MODE” is set to “ON” (factory- preset). Performing any operation during the demonstration stops the demonstration temporarily. Set to OFF to stop completely.
•When a tape whose erase protection tab is in the position that allows recording is loaded in the camcorder, demonstration is not available.
•If you do not detach the Lens Cap, you cannot see the actual changes of the Automatic Demonstration activated on the LCD monitor or viewfinder.
DATE/TIME
Allows you to set the current date and time. ( pg. 7)
LCD BRIGHT
To adjust the brightness of the LCD monitor, perform the following steps quickly (within approx.
1 second by each interval):
1)Select “LCD BRIGHT” in SYSTEM MENU. The “BRIGHT ON” message appears.
2)Press the BRIGHT Wheel 1 in to return to normal screen.
3)Rotate the BRIGHT Wheel 1 to display the bright level indicator h.
4)Rotate the BRIGHT Wheel 1 until the appropriate brightness is reached. After the BRIGHT Wheel 1 is released, the indicator soon disappears and adjustment is completed.
22