RECORDING
Set REC MODE,
1 Remove the lens cap. Set the Power Switch @ to “ ” or “ ” while pressing down the Lock Button ! located on the switch.
Shooting while using the viewfinder: Make sure
the LCD monitor is closed and locked. Shooting while using the LCD monitor: Make sure the LCD monitor is fully open.
The camcorder enters the
•The viewfinder and LCD monitor cannot be used simultaneously on this camcorder. Therefore, when opening the LCD monitor and tilting it upward to 180°, you cannot view any image in the viewfinder, however you can shoot yourself while viewing your own image in the LCD monitor.
2 Press the Recording Start/Stop Button 0.
Pappears while recording is in progress.
•To stop recording, press the Recording Start/Stop Button 0. The camcorder
To Adjust The Brightness Of The LCD Monitor:
When the Power Switch @ is set to “”, adjust “LCD BRIGHT” in SYSTEM MENU (☞ pg. 18, 22). When the Power Switch @ is set to “ ” or “OFF”, this adjustment cannot be performed.
PLAYBACK
1 Load a tape (☞ pg. 8, “Loading/Unloading A Cassette”).
2 Set the Power Switch @ to “PLAY” while pressing down the Lock Button ! located on the switch. To start playback, press 4/6&.
To stop playback temporarily (Still Playback), press 4/6&. To stop playback, press 5r. Press 2
eto rewind, or 3* to
For VIDEO RECORDING/VIDEO PLAYBACK
•The camcorder shuts off automatically after about 5 minutes in the
“OFF”, then to “ ”, “ ” or “PLAY”.
• When the Power Switch @ is set to “ ”, “ ” or “PLAY” and the LCD monitor is opened at an angle of 60 degrees or more, the LCD monitor switches on and the viewfinder switches off automatically to save power.
•The playback picture can be viewed in the
viewfinder (with the LCD monitor shut), on the LCD monitor or on a connected TV (☞ pg. 15, “Connections To A TV/VCR”).
•To remove the indications, ☞ pg. 21, DISPLAY or OSD OUTPUT in SYSTEM MENU.
•To control the speaker volume, rotate the MENU Wheel 1 towards “+” to turn up, or towards
11