JVC LYT1997-001A-M, GZ-HM200 U Using an SD Card, Open the SD card cover, Close the SD card cover

Page 21

Using an SD Card

•Operations are conﬁ rmed on the following SD cards:

Class 4 or higher compatible SD or SDHC card. Panasonic, TOSHIBA, SanDisk, ATP SD card (256 MB to 2 GB) or SDHC card (4 GB to 32 GB)

For UXP mode, use Class 6 or higher.

•If other media are used, they may fail to record data correctly, or they may lose data that had already been recorded.

•MultiMediaCards are not supported.

•Cards used to record video on this camcorder cannot be played back on other devices.

•Some card readers (including internal card readers in PCs) may not be able to support SDHC format. If you use an SDHC card for recording and encounter any reading error, the card reader you are using, might be a non-SDHC supported device. Please use the camcorder or other SDHC compatible devices to access the card.

•Video data may not be recorded onto the SD cards on which video data have already been recorded using the devices from other manufacturers.

Insert an SD card

Preparation:

Press Power () button to turn off the camcorder.

1 Open the SD card cover.

Push the cover up gently, to open it.

2 Firmly insert the card with its clipped edge ﬁrst.

Clipped

Edge

3 Close the SD card cover.

To remove an SD card Push the SD card once.

After the card comes out a little, pull it out.

	NOTE
	• Insert and remove the SD card only while			ENGLISH
	the power is turned off. Otherwise, data on
	the card may be corrupted.
	• Do not touch the terminal on the reverse
	side of the label.
	side of the label.			GETTING STARTED

	Change the recording medium
	Change the recording medium

	The camcorder is programmed to record in
	[SLOT A] when it is shipped from the factory.
	You can change the recording medium to
	[SLOT B].

From the MENU.

Set [VIDEO SLOT SELECTION] and [IMAGE SLOT SELECTION] to [SLOT A] or [SLOT B].

MEDIA SETTINGS
VIDEO SLOT SELECTION
SLOT A
IMAGE SLOT SELECTION
FORMAT SDSLOTCARDB
SET	QUIT

INFORMATION

•Recording media switches automatically from Slot A to Slot B and vise versa after the card in the selected slot is full.

•You can conveniently record your video and shoot still image in separate SD cards by selecting the card slot (A or B) for each purpose.

Format an SD card when using it for the ﬁrst time

From the MENU.

Select [FORMAT SD CARD] to format the card.

MEDIA SETTINGS
VIDEO SLOT SELECTION
IMAGE SLOT SELECTION
FORMAT SD CARD
ERASE ALL DATA ON
SET	QUIT

21

Image 21

Contents Para futuras consultas For Future ReferenceModel No Serial No Número de modelo Número de serieFor USA-California Only Safety PrecautionsTrademarks Important Safety InstructionsGrip Adjustment Charge the battery before recordingAccess lamp Power/charge lamp blinks ChargingPower Button Date/Time SettingLCD monitor EffectiveStart recording Video recordingDon’t forget to make copies after recording Playing backJVC Software Licence Agreement JVC Software Licence AgreementTerm How to handle a CD-ROMAfter the menu is displayed on the LCD monitor Read This FirstSelect your desired language with a single click Model name is indicated on the bottom of your camcorderContents Accessories Attaching the Core FilterCD-ROM To Reinsert the Battery Preparing the Remote ControlPull out the battery holder by pressing the lock tab Lock Tab Lithium Battery CR2025Index # mode Remote ControlCamcorder ModeIndications on LCD Monitor Self-Timer IndicatorDuring both Video and Still Image Recording During Video Recording OnlyDuring Video Playback During Still Image Playback To display indication modes on LCD monitor Playback modeCharging the Battery Pack Necessary Settings before UseAttach the battery pack, then connect the AC adapter To detach the battery packDate/Time Setting Select Clock AdjustTouch Menu Language Setting Other SettingsSelect Language Select the desired languageOpen the SD card cover Using an SD CardFirmly insert the card with its clipped edge ﬁrst Close the SD card coverRecording Files Select ! video modeVideo Recording ModeSelect # still image mode Still Image RecordingPress and hold Snapshot halfway To change the maximum zoom ratio for Mode only Touch Menu Select Light Select the desired settingZooming LED LightTurning on the Face Detection Mode Checking the Remaining Battery PowerSelect Manual Setting in Menu Changing to Manual Recording ModeTouch Menu Select Manual Setting Manual RecordingSelect Scene Select or Effect Select the desired setting Video/Still Image Playback Playing Back FilesSelect the desired ﬁle Operations during Video PlaybackTouch Menu Select WIPE/FADER Playback with Special EffectsSelect a desired effect Select the ﬁle you want to play backViewing Files on TV Connection with TVPlayback Operation Switching off TV and Camcorder Operating Together with TV via Hdmi Playback on TV Managing Files Capturing a Still Image from a VideoDeleting Files Copying/Moving Files Copying FilesTouch Menu Select Edit Select Copy or MoveCopy ALL/MOVE ALL Using a BD/DVD BurnerSelect and COPY/SELECT and Move To quit the screen Select Quit To stop the ﬁle transferSelect Execute Select YES or noCamcorder Press Direct Disc To connect using the AV connectors analog dubbing Set the VCR/DVD recorder to its AUX input modeDubbing Files to a VCR/DVD Recorder Play back playlists on the camcorderCreating a Disc using a PC Creating a Disc using a PCClick Easy Installation Click Yes Select the desired language and click NextMaking Backup on the PC Preparation Click All volume in camcorder and click NextClick Finish To see the Instruction Guide for Everio MediaBrowserDrag the ﬁle and drop into the user list Click Start To disconnect the camcorder from Making User Lists to Arrange the FilesCopying Files to a disc Customer Support Information Folder Structure and Extensions= number Region Language Phone #Turning on the Export Mode Using with a Portable Media PlayerChanging the Export Setting Transferring the Files to PCUploading Files to Websites Turning on the Upload Mode Uploading FilesPress Upload twice Cannot upload the ﬁle to YouTubeTMTroubleshooting Changing the Menu SettingsRemaining battery Display Playback Other problemsSlowly when switching Between video modeVideo Mode Communicating ErrorFormat Error Data Deletion ErrorCleaning Speciﬁcations For connectorsAC Adapter Approx .3 WBattery life Approx year Power supplyApproximate recording time for video Hour/m minute Approximate number of storable images for still imageBattery Packs Recording Medium SD CardLCD Monitor Main Unit Victor Company of Japan, Limited Terms