Turning on the Face Detection Mode
If you set this mode on, the camcorder detects the faces and adjust brightness and focus so that the faces are recorded clearly.
Preparation:
•Select ! or # mode.
•Select the recording mode.
Select 
.
T |
W
/
To turn off the face detection mode Select 
again.
NOTE
•If the LCD monitor is turned upside down,
is not displayed. Change the setting when the LCD monitor is in the normal position.
•Depending on the condition, faces may not be detected.
•If the face detection does not work correctly, turn off the mode before recording.
Checking the Remaining Battery Power
Preparation:
•Disconnect the AC adapter from the camcorder.
•Attach the battery pack.
•Select the recording mode.
For ! mode:
Press INFO three times or INFO and then select ;.
For # mode:
Press the INFO button.
DIRECT | $#66'4;%10&+6+10 | ||
|
|
| |
DISC |
|
|
|
/#: 6+/'
OKP
INFO
QUIT
To return to the normal screen Select [QUIT] or press INFO.
NOTE
The recordable time display should only be used as a guide. It is displayed in
Checking the Remaining Space on the Recording Media
Preparation:
•Select ! mode.
•Select the recording mode.
Press the INFO button once (Slot A) or twice (Slot B).
DIRECT | MAX RECORDING TIME | SLOT B | |
DISC | 0h00m | ||
| |||
| 0h00m |
| |
| 0h00m |
| |
| 0h00m |
| |
INFO |
|
| |
| SET | QUIT |
The maximum recording time is displayed for each picture quality mode.
To change the video quality
1)Select the video quality.
2)Select [SET].
To change the recording media
1)Press INFO to select SLOT A or
SLOT B.
2)Select [SET].
To quit the screen Select [QUIT].
ENGLISH
PLAYBACK | RECORDING/ |
|
|
25