JVC LYT1997-001A-M, GZ-HM200 U instruction manual Cleaning

Page 47

	Indication	Action

	RECORDING FAILURE	• Remove and re-insert the SD card. (MultiMediaCard cannot
		be used.)
	PLAYBACK FAILED	• Remove any dirt from the SD card terminals.
	PLAYBACK FAILED	• Insert the SD card before switching the power on.
		• Insert the SD card before switching the power on.

	USE AC ADAPTOR	• Use the AC Adapter as power supply.

	POWER IS OFF, OR USB	• Turn on the power of the connected USB device.
	DEVICE IS UNSUPPORTED	• Connect the AC adapter to the BD/DVD burner.

	DVD-RW DISC HAS BEEN	• Replace the disc of the BD/DVD burner with another disc.
	ALREADY USED

	FINALIZATION FAILED	• Replace the disc of the BD/DVD burner with another disc.

	NO FILES	• Slide the mode switch to select the desired mode (! or #).

	VIDEO MANAGEMENT FILE	• Select [OK] to restore.
	IS DAMAGED, RECOVERY IS
	REQUIRED TO RECORD/
	PLAYBACK, RECOVER?

	NO EVENT REGISTERED	• Register events to the ﬁ les before you start recording.
	SCENES

	CANNOT DETECT FACE	• Turn the face detection mode on before you perform recording
	CANNOT DETECT FACE	or snapshot.
		or snapshot.

ENGLISH

Cleaning

Before cleaning, turn off the camcorder and remove the battery pack and AC adapter.

To clean the camcorder

Wipe the camcorder gently with a soft cloth. If the camcorder is particularly dirty, dip the cloth into diluted mild soap and wring it out well. After wiping with the wet cloth, wipe again with a dry cloth.

To clean the LCD monitor

Wipe the monitor gently with a soft cloth. Be careful not to damage the monitor.

To clean the lens

Wipe gently with lens cleaning paper.

NOTE

•Avoid using strong cleaning agents such as benzine or alcohol.

•Mold may form if the lens is left dirty.

•When using a cleaner or chemically treated cloth, refer to the cautions for each product.

FURTHER INFORMATION

47

Image 47

Contents Número de modelo Número de serie For Future ReferencePara futuras consultas Model No Serial NoFor USA-California Only Safety PrecautionsTrademarks Important Safety InstructionsPower/charge lamp blinks Charging Charge the battery before recordingGrip Adjustment Access lampEffective Date/Time SettingPower Button LCD monitorStart recording Video recordingDon’t forget to make copies after recording Playing backJVC Software Licence Agreement JVC Software Licence AgreementTerm How to handle a CD-ROMModel name is indicated on the bottom of your camcorder Read This FirstAfter the menu is displayed on the LCD monitor Select your desired language with a single clickContents CD-ROM AccessoriesAttaching the Core Filter Lock Tab Lithium Battery CR2025 Preparing the Remote ControlTo Reinsert the Battery Pull out the battery holder by pressing the lock tabIndex Mode Remote Control# mode CamcorderDuring Video Recording Only Self-Timer IndicatorIndications on LCD Monitor During both Video and Still Image RecordingDuring Video Playback During Still Image Playback To display indication modes on LCD monitor Playback mode To detach the battery pack Necessary Settings before UseCharging the Battery Pack Attach the battery pack, then connect the AC adapterTouch Menu Date/Time SettingSelect Clock Adjust Select the desired language Other SettingsLanguage Setting Select LanguageClose the SD card cover Using an SD CardOpen the SD card cover Firmly insert the card with its clipped edge ﬁrstMode Select ! video modeRecording Files Video RecordingPress and hold Snapshot halfway Select # still image modeStill Image Recording LED Light Touch Menu Select Light Select the desired setting To change the maximum zoom ratio for Mode only ZoomingSelect Turning on the Face Detection ModeChecking the Remaining Battery Power Manual Recording Changing to Manual Recording ModeManual Setting in Menu Touch Menu Select Manual SettingSelect Scene Select or Effect Select the desired setting Operations during Video Playback Playing Back FilesVideo/Still Image Playback Select the desired ﬁleSelect the ﬁle you want to play back Playback with Special EffectsTouch Menu Select WIPE/FADER Select a desired effectPlayback Operation Viewing Files on TVConnection with TV Playback on TV Switching off TV and CamcorderOperating Together with TV via Hdmi Deleting Files Managing FilesCapturing a Still Image from a Video Select Copy or Move Copying FilesCopying/Moving Files Touch Menu Select Edit To quit the screen Select Quit To stop the ﬁle transfer Using a BD/DVD BurnerCopy ALL/MOVE ALL Select and COPY/SELECT and MoveCamcorder Press Direct Disc Select ExecuteSelect YES or no Play back playlists on the camcorder Set the VCR/DVD recorder to its AUX input mode To connect using the AV connectors analog dubbing Dubbing Files to a VCR/DVD RecorderClick Yes Select the desired language and click Next Creating a Disc using a PCCreating a Disc using a PC Click Easy Installation To see the Instruction Guide for Everio MediaBrowser Click All volume in camcorder and click NextMaking Backup on the PC Preparation Click FinishMaking User Lists to Arrange the Files Click StartDrag the ﬁle and drop into the user list To disconnect the camcorder fromCopying Files to a disc Region Language Phone # Folder Structure and ExtensionsCustomer Support Information = numberTransferring the Files to PC Using with a Portable Media PlayerTurning on the Export Mode Changing the Export Setting Cannot upload the ﬁle to YouTubeTM Turning on the Upload Mode Uploading FilesUploading Files to Websites Press Upload twiceTroubleshooting Changing the Menu SettingsBetween video mode Display Playback Other problemsRemaining battery Slowly when switchingData Deletion Error Communicating ErrorVideo Mode Format ErrorCleaning Approx .3 W For connectorsSpeciﬁcations AC AdapterApproximate number of storable images for still image Power supplyBattery life Approx year Approximate recording time for video Hour/m minuteLCD Monitor Battery PacksRecording Medium SD Card Main Unit Victor Company of Japan, Limited Terms