JVC LYT1997-001A-M Display Playback Other problems, LCD monitor is, Difficult to see, Interrupted

Display

Playback

Other problems

Trouble		Action
The LCD monitor is	• The LCD monitor may be difficult to see if used in bright areas
difficult to see.		such as under direct sunlight.
	• Fully charge the battery, run it down, and then recharge it again.
The remaining battery	• If the camcorder is used for long periods of time in high or low
display is not correct.		temperatures, or if the battery is repeatedly charged, the amount
		of remaining battery may not be displayed correctly.
Sound or video are	• Sometimes playback is interrupted at the connecting section
interrupted.		between two scenes.
	• Select [PLAYBACK OTHER FILE] then search the video on the
		index screen.
Cannot find a recorded		(Video fi les that have damaged management information can be
		played back.)
video/image.	• Cancel group display and date search functions.
	• Change the setting in [VIDEO SLOT SELECTION] or [IMAGE
		SLOT SELECTION]. (Files on other media are not displayed.)
	• Slide the mode switch to select the desired mode (! or #).
The camcorder operates	•	If there are many files (such as video) in the camcorder, it takes
slowly when switching		time for the camcorder to respond. It is recommended that you
between video mode		copy all files from the camcorder onto your computer, and erase
and still image mode,		the fi les from the camcorder.
or when switching the
power on or off.
	•	Check the remaining battery charge.
	•	(When the battery is fully charged, the lamp does not fl ash.)
The lamp does not flash		When recharging in either a hot or cold environment, ensure that
during battery charging.		battery is being charged within the permitted temperature range.
		(If the battery is being recharged outside the permitted
		temperature range, recharging may stop to protect the battery.)
When connecting to	• When connecting to the HDMI cable, the image or sound may
the HDMI cable, the		not appear on the TV properly depending on the TV connected.
image or sound does		In such cases, perform the following operations.
not appear on the TV		1) Disconnect the HDMI cable and connect it again.
properly.		2) Turn off and on the camcorder again.
HDMI-CEC functions do	• TVs may operate differently depending on the specifi cations,
not work properly, and		even if they are HDMI-CEC compliant. Therefore, the HDMI-
the TV does not work		CEC functions of the camcorder cannot be guaranteed to
in conjunction with the		operate in combination with all the TVs. In such cases, set
camcorder.		[HDMI CONTROL] to [OFF].

ENGLISH

FURTHER INFORMATION

45