JVC GZ-HD10 manual For Windows, For Macintosh, Reset the camera if it does not operate correctly

PC OPERATION

⬛For Windows

Refer to the PC OPERATION GUIDE in the supplied CD-ROM.

!Load the provided CD-ROM into the PC. After a moment, the [Software Setup] screen appears. If the [Software Setup] screen does not appear, double-click the CD-ROM icon in [My Computer].

# Click

NOTE

Refer to the PC OPERATION GUIDE for the system requirements of the provided software. For details, refer to the User’s guide or Help of the software.

⬛For Macintosh

!Load the provided CD-ROM into the

Computer.

#Double-click the CD-ROM icon.

$Double-click “Start.pdf” in the “PC guide” folder.

%Click the desired language.

NOTES

•Adobe® Acrobat® Reader™ or Adobe® Reader® must be installed to read PDF

fi les. Adobe® Reader® can be located from Adobe’s web site: http://www.adobe.com/

•For more details on the operations, refer to the GUIDEBOOK and the PC OPERATION GUIDE in the supplied CD-ROM.

Read This First!

Make a backup of important recorded data It is recommended to copy your important recorded data to a DVD or other recording media for storage. (☞ p. 31) JVC will not be responsible for any lost data.

Make a trial recording

Before the actual recording of important data, make a trial recording and play back the recorded data to check that the video and sound have been recorded correctly.

Reset the camera if it does not operate correctly

This camera uses a microcomputer. Factors such as background noise and interference can prevent it from operating correctly. If the camera does not operate correctly, reset the camera.

Precautions on handling batteries

•Be sure to use the JVC BN-VF808U/VF823U battery packs.

•If the camera is subjected to electrostatic discharge, turn off the power before using it again.

If a malfunction occurs, stop using the camera immediately and consult your local JVC dealer

•If a problem occurs when using the microSD card, take the card together with the camera for repair. If one of them is not included, the cause of the malfunction cannot be diagnosed, and the camera cannot be repaired.

•Recorded data may be erased while the camera is being repaired or inspected. Back up all data before requesting repairs or inspections.

Because cameras may be used for demonstration in a shop, the demonstration mode is set to on by default

To deactivate the demonstration mode, set [DEMO MODE] to [OFF].

Do not cover the fan (☞ p. 12 (, /)

If the camera becomes too hot inside it may cause a malfunction.

EN 9