JVC LYT0002-0P1A specifications Set to Power OFF, BATT. Release Push Eject, Remove

Page 46
CLEAN LENS
Blow it with a blower brush, then wipe gently with lens cleaning paper.
REMOVE EYEPIECE
Turn the eyepiece counterclockwise and pull it out.
CLEAN VIEWFINDER
Remove dust using a blower brush.
RE-ATTACH EYEPIECE
Align the marks, re-attach the eyepiece and turn it clockwise.
CLEAN LCD MONITOR
Wipe gently with a soft cloth.
1
2 Slide MONITOR OPEN to open the LCD monitor and wipe gently with soft cloth. Be careful not to damage the monitor. Close the LCD monitor.
Cleaning The Camcorder
CLEAN EXTERIOR
Slide the LENS COVER open/close switch to close the lens cover.
Close and lock the cassette holder by pressing PUSH.
Press EJECT to open the cassette holder, then remove the cassette.
Set the power switch to POWER OFF to turn off the camcorder.
1
2
3
4 Close and lock the LCD monitor.
5 Press BATT. RELEASE to remove the battery pack.
6
After Use
USER MAINTENANCE

46EN

LENS COVER open/close switch

Set to “POWER OFF”.

BATT. RELEASE

PUSH EJECT

Remove.

MONITOR OPEN

Marks

3

4

5

6

NOTES:

Avoid using strong cleaning agents such as benzine or alcohol.

Cleaning should be done only after the battery pack has been removed or other power units have been disconnected.

Mould may form if the lens is left dirty.

Image 46
Contents GR-AXM40 Kingdom Dear CustomerIt is recommended that you Crossed Out Dust Bin MarkSome DO’S and DON’TS on the Safe USE of Equipment This unit is produced to comply with Standard IEC PublDigital Hyper Zoom pg Programme AE with Special Effects pgIntegrated Auto Light pg LCD Colour Monitor pg Picture Stabilizer pg Random Assemble EditingPLAY/PAUSE BATT. ReleaseEject Push Monitor Open Stop REWAttach Battery Pack PowerSupply Power Detach Battery PackCharge marker Car Battery Charger/Adapter BH-V3E optionalTo DC in jack Core Filter DC cord Close Cover Insert BatteryClose the compartment cover until it clicks in place Close Menu Start Clock OperationNear Menu FAR Set Power to Camera Tape length indicator Recording Mode SettingSET Recording Mode LCD monitor or viewfinder Recording mode indicatorLoading/Unloading a Cassette Grip Adjustment Viewfinder AdjustmentTripod Mounting Adjust LengthShoulder Strap Attachment Attach StrapLoad a Cassette Enter RECORD-STANDBY ModePower Start ShootingStop Recording Tape remaining time indicatorStart/Stop button Display button Shooting while watching the LCD monitor SwitchStart/Stop Power indicator Lens CoverSelf-recording Journalistic shootingBrightness control Retake R/F FeaturePurpose SET Video Light Video LightLight OFF/AUTO/ON Mark Programme AE With Special EffectsAfter 1 sec Program AE select dialAuto Mode Release Symbol Viewfinder indicationAuto Mode Lock DialRelease Focus Lock FocusingLock Focus Near FARPower zoom lever Program AE select dial FAR NearPicture Stabilizer Exposure ControlFade/Wipe Engage FADE- or Wipe Standby ModeTo Cancel FADE- or Wipe Standby Mode Select FunctionSelect Preset Title Engage Wide ModeRestore Normal Screen Instant TitlesMenu button Select Display Choose Display ModeDate/Time Character Insert SET SELAdjust White Balance Manual White Balance Adjustment M.W.BAdjust Focus Select White BalanceUsing Menu For Detailed Adjustment Access Menu ScreenMake Setting MenuOFF NormJlip ID no Menu FAR Near Animation Time-LapseRewind or Fast-forward the tape Speaker volume controlAdjust Volume PlaybackFF Stop REW PLAY/PAUSE Counter R/M Feature OperationConnect Camcorder to VCR Connect Camcorder to TVPlay Back on Connected VCR Cassette AdapterInsert Cassette in Adapter Remove Cassette from AdapterPLAY/PAUSE Power To Audio Video OUT connectors Video in connectorsOperate the VCR Random Assemble Editing R.A.EditSET Remote to Operate VCR Connect toPrepare VCR Access R.A. Edit Counter DisplayPrepare Camcorder Register Beginning of SceneEND Automatic Editing How to useBegin Automatic Editing Edited Tape VCR StopReplace Battery Holder Installing The BatteryPull OUT Battery Holder Buttons FunctionsRemote sensor Index Code Marking Interval Timer IndicatorRec Time Indicator LCD monitor or viewfinder START/STOP Viss INT. Time REC TimeTape Counter Counter R/M PowerIndicator Insert editingREW Play Audio dubbing indicatorMicrophone DUBBATT. Release Push Eject Set to Power OFFRemove Symptom Viewfinder Power source Wrong date and time are Review or Retake modeAn error number i.e. E03 appears That Date/Time setting is carried outLCD monitor/Viewfinder Indications Displayed. When the Power switch is set toFocus Indicator Tape Time50EN Controls ConnectorsIndicators Other PartsClock Lithium Battery Connection to a VCR/TV Auto Mode Lock Mode Auto Mode Release ModeMBR Code Setting Date/Time SettingDo not burn Do not use near flammable or explosive materialsDo not modify or disassemble Use only specified chargers Places of over 50C Make sure the cassette bears the VHS-C markDirect sunlight A closed car in summer Near a heater Serious malfunctioning Cleaning the video headsAbout moisture condensation Dust and dirt on video headsDetection, timer Adjustment Auto/Manual adjustmentOut connector Controlled Dimensions X 42 H Weight Approx gPage 58EN Page GR-AXM40