JVC LYT0002-0P1A specifications LCD monitor/Viewfinder Indications, Tape Time, Focus Indicator

INDEX LCD monitor/Viewfinder EN 49

7

8

9

0

!

@

#

$

1* 2* 3 4		5* 6
18min	Disp.	T30	%*
REC SP	Sepia		^
		– 05	&
			*
		MWB
1min	PAUSE	INDEX	(
	TAPE END		)
1/2s			q

	Merry Christmas		w
25. 12. 97		10 : 24 : 56

LCD monitor/Viewfinder Indications

1 * Cassette Warning/Remaining		☞ pg. 15
Tape Time
When no cassette is inserted: the Cassette (			)
Warning blinks.
When Erase Protection tab is not in the position
that allows recording: the Cassette (		) Warning
lights. Otherwise, the Remaining Tape Time is
displayed. When the Power switch is set to
“PLAY” and a tape is loaded: the Cassette (			)
mark is displayed regardless of the Erase
Protection tab’s position.
2 * Recording Mode (SP/EP) Indicator	....	☞ pg. 10
3, 8 PROGRAM AE Indicator		☞ pg. 20

Displayed at 3 for approx. 1 second when the PROGRAM AE select dial is switched from one position to another. Then only the indicator remains at 8.

3, 9 Fade/Wipe Standby Indicator ........ ☞ pg. 25

Displayed at 3 for approx. 2 seconds when the Fade/Wipe is switched from one function to another by pressing the SET button. Then only the indicator remains at 9.

4 Program Manager Function	☞ pg. 25
Indication
Appears when the PROGRAM AE select dial is
set to any position other than AUTO LOCK.
5 * Tape Length Display	☞ pg. 10
6 Zoom Indicator bar	☞ pg. 18
7 Recording Indicator	☞ pg. 14
0 Picture Stabilizer Indicator	☞ pg. 24
! Interval Time/Recording	☞ pg. 32
Time Indicator
@ •Record–Standby Mode Indicator	☞ pg. 14
•Lens Cover Warning:	☞ pg. 15
LENS COVER

# Instant Title Display	☞ pg. 26
$ Date/Time Character Display	☞ pg. 28

%* Battery Pack Remaining Power Indicator Changes as follows according to the battery pack’s remaining power level:

“”. When the power is almost gone, the indicator blinks, then the unit shuts off. Replace the battery pack with a fully charged one.

(Note: The symbol containing 3 darkened

squares — — does not necessarily mean that the battery pack is fully charged.)

^ Focus Indicator	☞ pg. 22
& Exposure Level Indicator	☞ pg. 24
* White Balance Mode Indicator	☞ pg. 29
( Menu Setting Change Indicator	☞ pg. 30
) Index Code Marking	☞ pg. 43
q Clock Warning

Once the power is turned on and the indicator blinks for about 10 seconds, perform the date and time settings (☞ pg. 9). After setting is complete, turn the power off and disconnect the power source. If you re-connect it and turn the power on and the indicator is blinking, that means that the clock (lithium) battery is either not installed or has discharged. Install, or replace the old battery with, a new one (☞ pg. 8).

w • Tape End Display: TAPE END ........... ☞ pg. 15

Appears when the end of the tape is reached during playback, recording or fast-forward.

•Condensation Warning:

When this indication appears, all functions are disabled. Turn the unit off (without removing the power source) for a few hours, and when you turn it on again the indicator should disappear.

*: During recording, pressing DISPLAY lets you remove indications marked with * from the screen.