JVC LYT0261-001B manual Date/Time Settings

System

Select Switch

MENU Button

Select Dial

Display

4NEXT

M. W. B. AUTO

D . ZOOM ON TELE MACRO OFF DATETIME TAPE LENGTH T30

PICTURE FINE

SNAPSHOT FULL

4RETURN

Power lamp

Power Switch

Menu Screen

EN13

Date/Time Settings

1 SELECTMODE OPERATION SYSTEM AND

Set the System Select Switch to “VIDEO” or “D.S.C.” , and set the Power Switch to “PRO.”.

•The power lamp comes on.

2 ACCESS MENU SCREEN

Press MENU.

3 SELECT FUNCTION

Rotate the Select Dial to move the highlight bar to “DATE/TIME”, then press it. The DATE/TIME Menu appears.

•If you decide you want to return the date and time to the previous settings, rotate the Select Dial to move the highlight bar to “EXIT” and press it, then go to step 7.

•If you want to set only the time without changing the date, go to step 5.

4 SET DATE

Rotate the Select Dial to move the highlight bar to the item you want to set and then press it. When the setting begins blinking, rotate the Select Dial until the correct setting appears and then press it. The setting stops blinking.

•Repeat this procedure until you’re satisfied with the Date settings (“YEAR”, “MONTH” and “DAY”).

5 SET TIME

DATETIME

YEAR		1999
MONTH		JAN
DAY	1
TIME	PM 12 : 00

EXIT

DATE/TIME Menu

12-hour indication with AM or PM

Rotate the Select Dial to move the highlight bar to “TIME” and then press it. When the hour setting begins blinking, rotate the Select Dial until the correct setting appears and then press it. When the hour setting stops blinking and the minute setting begins blinking, rotate the Select Dial until the correct setting appears and then press it. The minute setting stops blinking.

4NEXT

M. W. B. AUTO

D . ZOOM ON TELE MACRO OFF DATETIME TAPE LENGTH T30

PICTURE FINE

SNAPSHOT FULL

4RETURN

6 START CLOCK OPERATION

When none of these settings (“YEAR”, “MONTH”, “DAY”, “TIME”) blinks, rotate the Select Dial to move the highlight bar to “EXIT”, and press it. The Menu Screen reappears with the highlight bar on “RETURN”.

7 CLOSE MENU SCREEN

Press the Select Dial.

NOTE:

To display the date and time in the camcorder’s display and on a connected TV, see “Date/Time Insert”

(☞ pg. 34).