JVC LYT0261-001B manual Quick Operation Guide D.S.C. EN7, Snapshot Button

QUICKOPERATIONGUIDE(D.S.C.)EN7

A still image you shoot is stored in the camcorder's built-in memory.

SUPPLY POWER

AHook on.

B Push in.

BATTERY RELEASE

Using the battery pack

Hook its end to the camcorder ( ) and push the battery pack in until it locks in place ( ). (Charging procedure, ☞ pg. 10)

To remove the battery pack

Slide BATTERY RELEASE and pull out the battery pack.

PLAYBACK

REW (2/PAGE –) Button,

FF (3/PAGE +) Button

3

2

Set to “PLAY”

1

System Select Switch

Set to “D.S.C.”

1Set the System Select Switch to “D.S.C.”.

2Set the Power Switch to “PLAY”.

—A still image stored in memory appears.

3Press REW (2/PAGE –) or FF (3/PAGE +) to select the still image you want to view.

(For more details, ☞ pg. 52.)

•The viewfinder switches off automatically to save power when the LCD monitor is opened at an angle of over 60 degrees.

•The LCD monitor turns on/off when it is opened/closed at approx. 60 degrees.

SHOOTING

4SNAPSHOT Button

1 LENS COVER

Open/Close Ring

3 Set to “AUTO” or “PRO.”

2System Select Switch Set to “D.S.C.”

1 Turn the LENS COVER Open/Close Ring to open the lens cover.

2Set the System Select Switch to “D.S.C.”.

3 Set the Power Switch to “AUTO” or “PRO.”.

—The power lamp will light and an image will appear.

4Press the SNAPSHOT Button.

—A still image is shot and is stored in the camcorder’s memory.

(For more details, ☞ pgs. 22 – 25)

•The viewfinder switches off automatically to save power when the LCD monitor is opened at an angle of over 60 degrees.

•The LCD monitor turns on/off when it is opened/closed at approx. 60 degrees.