How to use the Touch Sensor
After the menu is displayed on the LCD monitor:
QSlide your finger up and down on the sensor.
RSelect [SET]. (Touch OK.)
ATo select an
BTo select an
Read these INSTRUCTIONS to enjoy your
CAMERA.
For more details on the operations, refer to the GUIDEBOOK in the
supplied
In order to view the GUIDEBOOK,
Adobe® Acrobat® ReaderTM or Adobe® Reader® must be installed.
Adobe® Reader® can be loaded from Adobe’s web site:
http://www.adobe.com/
NOTE
Select your desired language with a single click.
The model name is indicated on the bottom of your camera.
Read This First!
Make a backup of important recorded data It is recommended to copy your important recorded data to a DVD or other recording media for storage. JVC will not be responsible for any lost data.
Make a trial recording
Before the actual recording of important data, make a trial recording and play back the recorded data to check that the video and sound have been recorded correctly.
Reset the camera if it does not operate correctly
Open the LCD monitor and remove the power supply (battery pack or AC adapter) from the camera, then reattach it.
Precautions on handling batteries
•Be sure to use the JVC
•If the camera is subjected to electrostatic discharge, turn off the power before using it again.
If a malfunction occurs, stop using the camera immediately and contact www.jvc.com or by phone at
•Recorded data may be erased while the camera is being repaired or inspected. Back up all data before requesting repairs or inspections.
Because cameras may be used for demonstration in a shop, the demonstration mode is set to on by default To deactivate the demonstration mode, set [DEMO MODE] to [OFF].
GETTING STARTED
EN 11