Necessary Settings before Use
GETTING STARTED
Charging the Battery Pack
Attach the battery pack.(Z p. 4)
•You can also connect the AC adapter using the Everio dock connector. (☞ p. 9)
•The power/charge lamp blinks to indicate charging has started.
•When the lamp goes out, charging is finished.
•Unplug the AC adapter from the AC outlet and disconnect the AC adapter from the camera.
To check the remaining battery power See page 20.
To detach the battery pack
Open the LCD monitor and turn off the camera using the DISPLAY/< button before detaching the battery pack.
NOTE
•You can also use the camera with just the AC adapter. (☞ p. 4)
•Please do not pull or bend the AC adapter plug and cable. This may damage the AC adapter.
4 Select [CLOCK ADJUST].
5 Select [CLOCK SETTING].
6 Select the city closest to the area where you use the camera.
Selected area is highlighted
Principal city of the selected area
Time difference to
GMT
7 Select [ON] if daylight saving time is observed.
8 Set the date and time.
Change the setting by using the touch sensor and select [&] to set.
Date/Time Setting |
| |
|
|
|
1 | Open the LCD monitor to turn on the |
|
| camera. | 9 Select [SAVE]. |
2 |
| |
Touch MENU. | To reset the setting, select [CANCEL]. | |
| ||
3 | Select [DISPLAY SETTINGS]. |
|
16EN