JVC GZ-X900 Something appears to, Be shaking at the lens, SD card cannot, Be removed from Camera

	Trouble			Action
	Something appears to		•	When OIS is turned on, shaking may be observed at the lens. This
	be shaking at the lens.			is not a malfunction.
Other	The SD card cannot		• Push the SD card in a few more times.
	be removed from the
	camera.
problems			• You need your YouTube™ account to upload files to YouTube™.
	Cannot upload the file to			Create your account.
			• Refer to “Q&A”, “Latest Information”, “Download Information”, etc.
	YouTube	™
				in [Click for Latest Product Info] in the help of the provided Everio
				MediaBrowser software.
	Cannot export the file to		•	Refer to “Q&A”, “Latest Information”, “Download Information”, etc.
	iTunes®			in [Click for Latest Product Info] in the help of the provided Everio
				MediaBrowser software.

To reset the camera when it does not operate normally

!  Open the LCD monitor and turn off the camera using the POWER/DISP button before detaching the battery pack.

#  And remove the power supply (battery pack or AC adapter) from the camera, then reattach it. $  Execute [FACTORY PRESET].

Warning Indications

Indication	Action
SET DATE/TIME!	• Set the clock. After that, charge the internal battery for more than
	24 hours by connecting to the AC adapter. If the message still
	appears, consult your nearest JVC dealer.

•Be sure to use JVC battery packs. (Files recorded with other

COMMUNICATING ERROR devices that support AVCHD cannot be played back on this

	camera.)
CANNOT USE IN	• Replace the SD card. (Files recorded with other devices that
VIDEO MODE	support AVCHD cannot be played back on this camera.)
NOT FORMATTED	• Select [OK] and select [YES] to perform formatting.
FORMAT ERROR!	• Check the operating procedure, and perform once again.
	• Turn off the camera, and turn it on again.
DATA DELETION ERROR
	• Perform formatting. (All data is deleted.)
	• Remove and re-insert the SD card. (MultiMediaCard cannot be
MEMORY CARD ERROR!	used.)
	• Remove any dirt from the SD card terminals.
	• Insert the SD card before switching the power on.
	• Turn off the camera, and turn it on again.
RECORDING FAILURE	• Remove and re-insert the SD card. (MultiMediaCard cannot be
	used.)
	• Remove any dirt from the SD card terminals.
PLAYBACK FAILED	• Insert the SD card before switching the power on.
THIS CARD CANNOT BE	• When you attempt to perform editing on the inserted SD
USED FOR RECORDING OR	card that has been used for recording on cameras from other
EDITING ON THIS CAMERA	manufacturers.

FURTHER INFORMATION

EN 39