JVC GZ-X900 manual Manual Recording, Capturing Still Images in a Movie

Touch the shutter mode and select RECORD ONE SHOT or CONTINUOUS SHOOTING.

Set the recording dial to ! mode.

Capturing Still Images in a Movie

You can capture still images while recording a video.

Preparation:

•Select the recording mode.

1

2

• RECORD ONE SHOT: Records one still image.

(There will be no indicator display on the LCD monitor when recording one image.)

• { CONTINUOUS SHOOTING: Records still images continuously.

RECORD ONE SHOT

After performing steps 1-2

3 Press SNAPSHOT.

CONTINUOUS SHOOTING

After performing steps 1-2

3 Select the continuous shooting mode from the menu.

• Select from HIGH SPEED /

MEDIUM SPEED / LOW SPEED.

4 Press and hold SNAPSHOT.

•Recording ends when SNAPSHOT is released.

•At this time, SNAPSHOT will not work until the writing to the media is completed.

The photo indicator lights up immediately on the LCD monitor when SNAPSHOT is pressed.

NOTE

•Recording cannot be performed when the menu is displayed.

Close the menu.

•Functions that are only available in still image mode cannot be used.

(Example: flash, GAIN, etc.)

•The number of recordable still images depends on the remaining space on the recording media.

•The size of recorded still images is 3072 x 1728, regardless of the image size that is set.

•The still images recorded in the video mode contains a little more noise than the still images recorded in the still image mode.

•Simultaneous recording (still image recording) may be performed even when the dial is set to [M].

RECORDING/PLAYBACK

Manual Recording

Manual recording mode enables you to set the focus and screen brightness, etc. manually.

Changing to Manual Recording Mode

Preparation:

•Select the recording mode.

Set the recording dial to manual video 3 or manual still image 3.

manual video

manual still image

To return to the auto recording mode Set the recording dial to ! or #.

EN 21