22 EN Menus for detailed adjustment
The “SYSTEM” functions which are set when the Power Switch is set to “REC” are also applied when the Power Switch is set to “PLAY”.
SYSTEM
Menus | Settings: [ ] = |
LANGUAGE | [ENGLISH] / FRANCAIS / ESPAÑOL / PORTUGUÊS |
| The language setting can be changed. ( 12) |
MELODY | OFF: Disengages the function. |
| [ON]: A melody sounds when any operation is performed. |
DEMO MODE | OFF: Automatic demonstration will not take place. |
| [ON]: Demonstrates certain functions such as Wipe/Fader and |
| Effects, etc., and can be used to confirm how these functions |
| operate. Demonstration starts in the following cases: |
| • When the Menu Screen is closed after “DEMO MODE” is turned |
| “ON”. |
| • With “DEMO MODE” set to “ON”, if there is no operation for about |
| 3 minutes after the Power Switch is set to “REC”. |
| • Performing any operation during the demonstration stops the |
| demonstration temporarily. If no operation is performed for more |
| than 3 minutes after that, the demonstration will resume. |
| Note: |
| If a cassette is in the camcorder, the demonstration cannot be turned on. |
CAM RESET | [CANCEL]: Does not reset all settings to the |
| EXECUTE: Resets all settings to the |
Playback Menus
The settings on the next page ( 23) are effective only for video playback except “REC MODE”. The parameters (except “SOUND L/R” and “NARRATION” settings) are the same as in the description on page 21.
SOUND L/R and NARRATION
During tape playback, the camcorder detects the sound mode in which the recording was made, and plays the sound back. Select the sound to accompany your playback picture.
CONTINUED ON NEXT PAGE