JVC LYT1776-001A manual Read This First, We recommend cleaning your video heads before use

Page 2

2 EN

Read This First!

Before recording important video, be sure to make a trial recording.

Play back your trial recording to make sure the video and audio have been recorded

properly.

• We recommend cleaning your video heads before use.

If you haven’t used your camcorder for awhile, the heads may be dirty. We

recommend periodically cleaning the video heads with a cleaning cassette (optional).

Be sure to store your cassette tapes and camcorder in the proper environment. Video heads can become dirty more easily if your cassette tapes and camcorder are stored in a dusty area. Cassette tapes should be removed from the camcorder and stored in cassette cases. Store the camcorder in a bag or other container.

Use SP (Standard Play) mode for important video recordings.

LP (Long Play) mode lets you record 50% more video than SP (Standard Play) mode, but you may experience mosaic-like noise during playback depending on the tape characteristics and the usage environment. So, for important recordings, we recommend using SP mode.

For safety and reliability.

It is recommended only genuine JVC batteries and accessories are used in this camcorder.

This product includes patented and other proprietary technology and will operate only with JVC Data Battery. Use the JVC BN-VF808U/VF815U/VF823U battery packs. Using generic non-JVC batteries can cause damage to the internal charging circuitry.

Remember that this camcorder is not compatible with other digital video formats.

It is recommended that you use JVC brand cassette tapes.

Your camcorder is compatible with all brands of commercially available cassette tapes complying with the MiniDV standard, but JVC brand cassette tapes are designed and optimized to maximize the performance of your camcorder.

Remember that this camcorder is intended for private consumer use only.

Any commercial use without proper permission is prohibited. (Even if you record an event such as a show, performance or exhibition for personal enjoyment, it is strongly recommended that you obtain permission beforehand.)

DO NOT leave the unit

-in place of over 50°C (122°F)

-in place where humidity is extremely low (below 35%) or extremely high (80%).

-in direct sunlight.

-in a closed car in summer.

-near a heater.

The LCD monitor is made with high- precision technology. However, black spots or bright spots of light (red, green or blue) may appear constantly on the LCD monitor. These spots are not recorded on the tape. This is not due to any defect of the unit. (Effective dots: more than 99.99%)

Do not leave the battery pack attached when the camcorder is not in use and

check the unit regularly whether it is working or not.

Also read “CAUTIONS” on pages 33 – 35.

About Batteries

DANGER! Do not attempt to take the batteries apart, or expose them to fl ame or excessive heat, as it may cause a fi re or explosion. WARNING! Do not allow the battery or its terminals to come in contact with metals, as this can result in a short circuit and possibly start a fi re.

To deactivate the demonstration, set “DEMO MODE” to “OFF”. ( 19, 22)

Image 2
Contents Dear Customer Model No Serial NoTo deactivate the demonstration, set Demo Mode to OFF.  19 We recommend cleaning your video heads before useFor safety and reliability Read This FirstSafety Precautions Important Safety Instructions Regarding This Manual Attach the Core Filter AccessoriesAttach the Lens Cap Tripod Mounting Grip AdjustmentAttach the Shoulder Strap Strap Guide Buckle EyeletHow to adjust the LCD Monitor IndexAuto/Manual Mode ConnectorsIndicator Controls12BIT 10 EN169 1555 DECTo detach the battery pack PowerCharging The Battery Pack Using The Battery PackData Battery System Language SettingsDate/Time Settings Using AC PowerDisplay Brightness AdjustmentWide Mode Quick Review Basic RecordingTape Remaining Time Approximate recording timeRecording From The Middle Of a Tape You can zoom in up to 30X by using the optical zoomZoom Time CodeNormal Playback Load a cassette  Set the Power Switch to Play To control the speaker volume Still PlaybackTo resume normal playback, press U Variable Shuttle SearchBlank Search Displays appear on the connected TV If using a VCR, go to . If not, go to stepTo AV connector For Video Recording Menu For Video Playback MenuRecording Menus On Screen LCD REC ModeSound Mode DATE/TIMEPlayback Menus Demo ModeCAM Reset Language English / Francais / Español / PortuguêsMIX Blank Search Cancel / ExecuteNarration Sound L/RExposure Control To reset to Auto FocusManual Focus Manual focus is recommended in situations listed belowSpot Exposure Control Iris LockBacklight Compensation White Balance Adjustment Manual White Balance AdjustmentWipe Or Fader Effects Program AE, Effects Shutter EffectsDubbing To a VCR Unit Equipped With a DV To use this camcorder as a recorderComputer Troubleshooting EN High ExhaustedAC Adapter Battery PacksUsing Household AC Plug Adapter CassettesAbout moisture condensation LCD MonitorMain Unit Cleaning The Camcorder AC Adapter For ConnectorsCamcorder For GeneralConnections To a TV Or Changing The Menu SettingsWipe Or Fader Effects Connection To a PersonalMemo Victor Company of Japan, Limited