JVC LYT1776-001A manual Unit Equipped With a DV, To use this camcorder as a recorder

Page 29

Dubbing To Or From A Video

Unit Equipped With A DV

Connector (Digital Dubbing)

It is also possible to copy recorded scenes from the camcorder onto another video unit equipped with a DV connector. Since a digital signal is sent, there is little, if any, image or sound deterioration.

Editing EN 29

Notes:

It is recommended to use the AC Adapter as the power supply instead of the battery pack ( 11).

If a blank portion or disturbed image is played back on the player during dubbing, the dubbing may stop so that an unusual image is not dubbed.

Even though the DV cable is connected correctly, sometimes the image may not appear in step 4. If this occurs, turn off the power and make connections again.

When using a DV cable, be sure to use the optional JVC VC-VDV204U or VC-VDV206U DV cable.

To use this camcorder as a recorder

1 Make sure all units are turned off.

Core filter

To DV IN/OUT

DV cable (optional)

To DV IN/OUT

2Connect this camcorder to a video unit equipped with a DV output connector using a DV cable as shown in the illustration.

3Set the camcorder’s Power Switch to “PLAY”.

4 Set “REC MODE” to “SP” or “LP” ( 23).

5 Start playback on the player.

6

Press the Recording Start/Stop Button to

 

 

engage the Record-Pause mode.

 

 

• The “

 

 

” indication appears on the

 

 

 

 

 

screen.

 

7

At the point you want to start dubbing,

 

 

press the Recording Start/Stop Button to

 

 

start

dubbing. The T indication rotates.

8

Press the Recording Start/Stop Button

Video unit equipped with DV connector

To use this camcorder as a player

1 Make sure all units are turned off.

2Connect this camcorder to a video unit equipped with a DV input connector using a DV cable as shown in the illustration.

3 Start playback on the camcorder ( 16).

4At the point you want to start dubbing, start recording on the video unit. (Refer to the video unit’s instruction manual.)

5To stop dubbing, stop recording on the video unit, then stop playback on this camcorder.

again to stop dubbing. The T indication

stops rotating.

9 Press 8 to return to the normal playback

mode.

Note:

Digital Dubbing is performed in the sound mode recorded on the original tape, regardless of the current “SOUND MODE” setting ( 21).

COPY PROTECTED

Appears if dubbing of copyguarded signals is attempted while this camcorder is being used as a recorder.

ENGLISH

Image 29
Contents Model No Serial No Dear CustomerFor safety and reliability We recommend cleaning your video heads before useTo deactivate the demonstration, set Demo Mode to OFF.  19 Read This FirstSafety Precautions Important Safety Instructions Regarding This Manual Attach the Core Filter AccessoriesAttach the Lens Cap Attach the Shoulder Strap Grip AdjustmentTripod Mounting Strap Guide Buckle EyeletIndex How to adjust the LCD MonitorIndicator ConnectorsAuto/Manual Mode Controls169 10 EN12BIT 1555 DECCharging The Battery Pack PowerTo detach the battery pack Using The Battery PackDate/Time Settings Language SettingsData Battery System Using AC PowerDisplay Brightness AdjustmentWide Mode Tape Remaining Time Basic RecordingQuick Review Approximate recording timeZoom You can zoom in up to 30X by using the optical zoomRecording From The Middle Of a Tape Time CodeTo control the speaker volume Load a cassette  Set the Power Switch to Play Normal Playback Still PlaybackTo resume normal playback, press U Variable Shuttle SearchBlank Search Displays appear on the connected TV If using a VCR, go to . If not, go to stepTo AV connector For Video Playback Menu For Video Recording MenuRecording Menus Sound Mode REC ModeOn Screen LCD DATE/TIMECAM Reset Demo ModePlayback Menus Language English / Francais / Español / PortuguêsNarration Blank Search Cancel / ExecuteMIX Sound L/RManual Focus To reset to Auto FocusExposure Control Manual focus is recommended in situations listed belowSpot Exposure Control Iris LockBacklight Compensation Manual White Balance Adjustment White Balance AdjustmentProgram AE, Effects Shutter Effects Wipe Or Fader EffectsDubbing To a VCR To use this camcorder as a recorder Unit Equipped With a DVComputer Troubleshooting EN Exhausted HighUsing Household AC Plug Adapter Battery PacksAC Adapter CassettesAbout moisture condensation LCD MonitorMain Unit Cleaning The Camcorder Camcorder For ConnectorsAC Adapter For GeneralWipe Or Fader Effects Changing The Menu SettingsConnections To a TV Or Connection To a PersonalMemo Victor Company of Japan, Limited