JVC LYT1776-001A REC Mode, Sound Mode, On Screen LCD, Date/Time, Clock ADJ, Time Code, Output

Menus for detailed adjustment EN 21

TAPE

Menus		Settings: [ ] = Factory-preset
REC MODE	[SP]*:	To record in the SP (Standard Play) mode
	LP:	Long Play—more economical, providing 1.5 times the
		recording time.
	*SP indicator does not appear on the screen.

Notes:

•If the recording mode is switched, the playback picture will be blurred at the switching point.

•During playback of a tape recorded on another camcorder, blocks of noise may appear or there may be momentary pauses in the sound.

SOUND MODE	[12BIT]: Enables video recording of stereo sound on four separate
	channels. (Equivalent to the 32 kHz mode of previous
	models).
	16BIT: Enables video recording of stereo sound on two separate
	channels. (Equivalent to the 48 kHz mode of previous
	models).

The “DISPLAY” settings (except “CLOCK ADJ.”, “16:9 OUTPUT” and “BRIGHT”) are effective only for shooting.

DISPLAY

Menus			Settings: [ ] = Factory-preset
ON SCREEN	LCD:	Keeps the camcorder’s display (except the date, time and
		time code) from appearing on the connected TV screen.
	[LCD/TV]: Makes the camcorder’s display appear on screen when
			the camcorder is connected to a TV.
DATE/TIME	[OFF]: The date/time does not appear.
	ON:	The date/time is always displayed.
CLOCK ADJ.	 12, “Date/Time Settings”.
TIME CODE	[OFF]: Time code is not displayed.
	ON:	Time code is displayed on the camcorder and on the
		connected TV. Frame numbers are not displayed during
		recording. ( 15)
16:9 OUTPUT	To enable your tv to display images in 16:9 wide mode, set the tv
	screen size correctly.
	[4:3 TV]:		For TV with an aspect ratio of 4:3.
	16:9 TV:		For TV with an aspect ratio of 16:9.
BRIGHT	 13, “Brightness Adjustment Of The Display”.

ENGLISH