Tektronix Phaser 350 manual Color corrections, Color correction mode Description

3Printing Basics

Color corrections

The printer provides TekColor Dynamic Correction software, which consists of the following color correction modes:

Color correction mode	Description
None	No correction made to colors.
Vivid Color	Default setting. Produces the brightest possible colors.
Display	Adjusts color to closely approximate the colors on a
	standard display screen.
SWOP Press	Specification for Web Offset Publications. Typically used
	to match U.S. press standards.
Euroscale Press	Used to match equivalent 3M Matchprint® proofs.
Commercial Press	Used to match commercial 3M Matchprint® proofs.
Monochrome	Prints a color image as a monochrome gray scale.
	Outputs color page masters in black-and-white for
	photocopying.
Use Printer Setting	Uses the color correction mode specified in the printer’s
	front panel setting rather than any printer driver setting.

Vivid Color, the default color correction mode, is generally recommended for typical office printing.

You can view an approximate sample output of some color corrections at the bottom of the printer’s startup page. Refer to “Startup Page” on page 7-6 for more information.

Note If your printer is networked and you have changed the front panel settings, make sure that you tell other users on the network. Printer settings affect all prints made with non-supported drivers.

3-28Phaser 350 Color Printer