Tektronix Phaser 350 manual Replacing the maintenance tray

Caring for Your Printer 5

Replacing the maintenance tray

Approximate time to complete: 1 minute

The printer uses the maintenance tray, located inside the printer behind the front cover, prior to each printing and during cleaning operations. A front panel message tells you when the maintenance tray is low, allowing you to make a minimal number of prints before the tray is depleted. Install a new maintenance tray to continue printing. Each replacement maintenance tray has a print capacity of approximately 12,500 prints. To avoid printing delays, keep an extra maintenance tray available for use in the printer.

Note There is a 15-minute warm-up period required after replacing the maintenance tray.

To order a maintenance tray (Tektronix order number 436-0294-03), contact your local dealer or, in the United States, call Tektronix at 1-800-835-6100.

1.Open the front cover.

9101-22

Caution Some surfaces inside the printer may be hot. Be careful not to touch the areas marked with this caution icon:

User Manual 5-7