5Caring for Your Printer
1.Load the upper media tray with sheets of clean,
2.When the printer is on and the Ready message or the printer’s name appears in the front panel, press the Clean button. The printer displays the first selection in the menu:
Clean:Light Stripes
3.Press the left arrow
Clean:Ink Smears
<---- Clean Test
4.Press the Clean button. The printer displays the following front panel message:
Warming Up
Cancel
5.After a short delay during the
A front panel message indicates the number of sheets remaining to be fed. For example:
Cleaning:Using 10 Sheets
6.When the cleaning sequence is complete, inspect the last sheet of paper fed through the printer. If it is not clean, repeat the cleaning sequence by pressing the Clean button once again.
7.Return the printer to normal operation by pressing the Exit button.
If the ink smear problem persists after running clean sheets of paper through the paper path, refer to the following two procedures for directions on cleaning paper feed rollers and the paper exit path.