Tektronix Phaser 350 manual Front panel controls, Accessing the front panel menu

Getting Set Up 2

Turning off the Startup page

After the printer has warmed up, it automatically prints a startup page. If you want to turn off the startup page, you can do so through the front panel. Refer to Chapter 7 for instructions on using the front panel. You can also control the startup page through a utility file provided on the printer’s CD-ROM, or through your World Wide Web browser. Refer to the CD-ROM or the PhaserShare Network Cards and Software System Administrator Manual, respectively, for information on utility files and web browsers.

Front panel controls

When you first turn on the printer, the Power and Error indicators on the front panel are lighted. The printer takes about 15 minutes to completely warm up. During the warm-up cycle, the Power indicator remains on, the Error light goes out, and the front panel displays a series of “Warming up” messages.

Status messages, such as Warming Up, appear on the top line of the display. Button labels, such as Info, Clean and Menu , appear on the lower line of the display. Button labels identify a function for the corresponding button located under the label. For example, to access other menus, press the button located under the word Menu .

Ready

Info Clean Menu

Power

Error

Exit

9682-04

Accessing the front panel menu

When the printer is shipped, access to the front panel menu is made by pressing the Menu button. System administrators may choose to limit access to front panel menus, requiring users to know a two-button combination to gain full access to menus. Refer to the Chapter 7 for a complete description of front panel controls and menus.

User Manual 2-27