Tektronix Phaser 350 manual PhaserShare card optional

Getting Set Up 2

1.PhaserShare card (optional)

The printer accepts one of the following:

■PhaserShare Ethernet card supporting Novell NetWare, EtherTalk, TCP/IP, Telnet and FTP protocols.

■PhaserShare Token Ring card supporting Novell NetWare, TCP/IP, TokenTalk, Telnet and FTP protocols.

■PhaserShare LocalTalk/serial card.

The PhaserShare Network Cards and Software System Administrator Manual contains all the information necessary for configuring and using the optional network interfaces. Refer to “PhaserShare network cards” on page 8-8 for ordering information.

2.Parallel (standard)

If needed, the parallel port can be configured for bi-directional communications. Refer to the on-line manual on the printer’s CD-ROM for instructions on using utility files to control the parallel port. The CD-ROM also covers other topics such as disabling timeouts, bi-directional status reporting and the parallel port pinout.

3.SCSI (standard)

The SCSI port is used only for connecting an external hard disk or for connecting the Phaser Copystation. Refer to “SCSI peripheral devices” on page 2-24 for more information on the SCSI port.

Refer to “Phaser Copystation” on page 8-9 for more information on the Phaser Copystation.

Note Make all printer connections before you turn on the printer.

User Manual 2-21