Tektronix manual 44Phaser 350 Color Printer

2Getting Set Up

6.A message appears as files are copied to your hard disk. Click the Restart Windows button when the installation is complete.

7.When the Install PostScript Printer from PPD dialog box appears, select your printer in the Printer Descriptions Available list and click Install:

■Select Tektronix Phaser 350 if you have the standard version of the printer.

■Select Tektronix Phaser 350 600x300 if you have the printer’s Extended Features option.

Note If you are not sure which configuration of the printer you have, the printer’s startup page lists this information under Extended Features: Yes/No. See page 2-29 for instructions on printing a copy of the printer’s startup page.

8.At the installation successful message, click OK.

9.Click Close in the Install PostScript Printer from PPD dialog box.

10.At the message, click OK; the Control Panel opens.

11.From the Control Panel, double-click Printers.

12.In the Printers dialog box, select the Tektronix Phaser 350 printer you just installed, then click Connect.

13.In the Connect dialog box, select the port the printer is connected to, then click OK.

Note Refer to the Adobe PostScript Printer Driver User Guide on the printer’s CD-ROM (USRGUIDE.PDF) for more detailed information on the AdobePS 3 driver.

2-44Phaser 350 Color Printer