Tektronix Phaser 350 manual Interface Select Then do the following, LPTx, COMx

2Getting Set Up

Configuring the driver

1.Open the Printers dialog box if it is not still displayed. (From the Control Panel, double-click the Printers icon.)

2.In the Printers dialog box, choose your printer from the list of installed printers.

3.Click the Set As Default Printer button if you want to select your printer as the default.

4.Click the Connect button; the Connect dialog box appears.

5.Select the port your printer is connected to.

The printer’s configuration page contains the information you need to set up the printer’s port.

Interface	Select	Then do the following
Parallel	LPTx	Go to Step 6.
Serial	COMx	1.	Click the Settings button to open the
			Settings dialog box.
		2.	Fill in each item based on your
			printer’s configuration, then click OK.
			Refer to your Microsoft Windows
			documentation for details, or ask your
			network administrator for help.
Network	Network port	1.	Click the Network button to open the
	(LPTx or COMx)		Printers-Network Connections
			dialog box.
		2.	Fill in each item based on your
			printer’s configuration, then click OK.

Refer to your Microsoft Windows documentation for details, or ask your network administrator for help.

Note You can use the FILE port to save a document to a PostScript file instead of sending it to the printer. For more information, see your Microsoft Windows documentation.

2-40Phaser 350 Color Printer