Tektronix Phaser 350 manual Media Tray Empty

	Troubleshooting 6
Front panel messages (cont'd.)
Message	Action
Media Tray Empty	Add paper or transparencies to the media tray.
Melting Ink	No user action required. Displayed during print jobs
	that require large amounts of ink.
Processing Data	No user action required.
Ready	No user action required. The printer is ready to print.
Replace Lower	Insert the lower media tray.
Media Tray
Replace	Open the front cover, remove the maintenance tray,
Maintenance Tray	and replace it with a new one.
Replace Media Tray	Insert the standard media tray.
Replace Upper	Insert the standard media tray.
Media Tray
Standby	Press Wakeup or send a print job to bring the printer
	to Ready.
Tektronix V:<n.n>	No user action required. Wait for a period of time.
Unlock Transit	Unlock the transit restraint on the right side of the
Restraint	printer before sending print jobs.
Upper Media Tray	Add paper or transparencies to the standard media
Empty	tray.
Waiting For Manual	Insert paper or transparency in the manual feed slot.
Feed
Waiting For Paper	The print job specifies paper but the printer detects that
	the transparency tray is installed. Load paper in the
	media tray and press OK .
Waiting For	The print job specifies transparency but the printer
Transparency	detects that the paper tray is installed. Load
	transparency in the media tray and press OK .
Warming Up	No user action required. Wait for a period of time.
Waste Tray Full	Open the front cover, remove the maintenance tray and
	empty the waste tray.

User Manual 6-5