Caring for Your Printer 5

5.There are two sets of lower paper-feed rollers. One set of rollers is rubber; the other set is white plastic. The rubber lower rollers are located below the maintenance tray; the white plastic rollers are located on the inside of the front cover.

To clean the lower rubber-feed rollers, use either the pre-packaged alcohol-soaked cloth or fold a lint-free cloth into a two-inch square and soak with alcohol.

Place and hold the cleaning cloth on top of each lower rubber roller, pressing to create pressure against the roller.

Press the middle finger of your other hand flat against a lower roller and turn the roller using the entire length of your finger. The lower rubber roller should rotate four or five complete revolutions to ensure proper cleaning.

Scrub each roller thoroughly. If the cloth becomes dirty, discard it and use another.

9682-13

User Manual

5-23

Page 163
Image 163
Tektronix Phaser 350 manual 9682-13