Tektronix Phaser 350 manual Check the printer’s language mode

Troubleshooting 6

Check the printer’s language mode

If your file doesn’t print, the language on the printer’s port you are using may have been changed.

Note Monochrome PCL5 is optional and must be authorized before you can use it; see the on-line manual on the printer’s CD-ROM for instructions.

1.Print a copy of the printer’s configuration page to see the language mode on each port. Refer to the on-line manual on the printer’s CD-ROM for instructions on printing a configuration page.

2.If the printer port you are using has the wrong language set for the type of application you are using, send one of the following utility files to the printer:

■To print PostScript files, use the PSCRIPT.PS file to set up a port to receive PostScript. Refer to the on-line manual on the printer’s CD-ROM for details.

■To print HP-GL files, use the HPGL.PS file to set up a port to receive HP-GL. Refer to the on-line manual on the printer’s CD-ROM for details.

■To print PostScript, or HP-GL, or Monochrome PCL5 files interchangeably, use the AIS.PS file to set up a port for automatic language selection. Refer to the on-line manual on the printer’s CD-ROM for details.

User Manual 6-25