Tektronix Phaser 350 manual Making default settings

Getting Set Up 2

Making default settings

1.From the Properties dialog box, click the Device Settings tab.

2.In the Device Settings sheet, locate Form To Tray Assignment.

3.Under Form To Tray Assignment, highlight the first tray.

4.In the box that appears at the bottom of the window, select the size media you will be using in that tray.

5.Repeat Steps 3 and 4 for each installed tray.

6.Click OK to return to the Control Panel.

Selecting a printer's Default Document Properties

Note Document properties set from an application always override document defaults set in the printer's Document Properties sheets. However, if an application does not set a document property (such as page orientation or paper size), the printer defaults to the document properties set in the printer's Document Properties sheets.

1.From the Control Panel, open the Printers folder.

2.With the right mouse button, click on the printer’s icon.

3.With the left mouse button, click on Document Defaults.

4.Click the Advanced tab to change any printer features, including TekColor color corrections.

5.Click the Page Setup tab to see other features.

User Manual 2-47