Tektronix Phaser 350 manual Using the Tektronix Driver for Windows

3Printing Basics

Using the Tektronix Driver for Windows 3.1

1.From the Control Panel, double-click the Printers icon to open the Printers dialog box.

2.In the Printers dialog box, choose your printer from the list of installed printers.

3.Click the Setup button. A dialog box appears with the name of the printer you selected across the top. Use this dialog box to select paper source, paper size, image orientation, and number of copies.

Note You may want to set the number of copies from your application because the number of copies in the Setup dialog box remains the same until you change it again. Also, if you are printing multiple pages, make sure the Transmission Retry is set for at least

600 seconds (10 minutes), to avoid unnecessary timeouts.

4.Click the Options button to see the Options dialog box.

5.Click the Printer Features button to see the Tektronix Printer Features dialog box. Make color correction, print quality, and other selections as desired.

6.Click OK until you return to the Printers dialog box, then click Close.

3-8 Phaser 350 Color Printer