Tektronix Phaser 350 manual 9101-57

2Getting Set Up

Warning The printer is not permanently attached to the Lower Paper Tray Assembly. When moving the printer, first disconnect it from the Lower Paper Tray Assembly and then move each unit separately. Moving the printer incorrectly may cause damage or personal injury.

The printer weighs about 32 kg (70 lbs.). Do not attempt to lift the printer without the assistance of another person.

9101-57

Install the Lower Paper Tray Assembly using these steps:

1.Remove the tray from the Lower Paper Tray Assembly. Remove the shipping block from the tray and replace the tray in the Lower Paper Tray Assembly.

2.Place the printer on top of the Lower Paper Tray Assembly.

Note To ensure proper printer operation, install the printer and Lower Paper Tray Assembly on a flat surface having no more than 3 degrees of tilt. This is approximately equivalent to lifting one side of the printer 2 cm (0.75 inches) off of a flat surface.

2-8 Phaser 350 Color Printer