Getting Set Up 2

8.In the Install From Disk dialog box, do one of the following:

CD-ROM:

a.Click Browse.

b.In the Open dialog box select the Drive for the printer’s CD-ROM.

c.Select the \WIN95_NT directory under Folders.

d.Click OK.

Diskette:

a.Click Browse.

b.In the Open dialog box select the Drive for the Printer Software for Windows diskette.

c.Click OK.

9.A list of Tektronix printers appears. Select your printer in the list, then click Next.

Select Tektronix Phaser 350 if you have the standard version of the printer.

Select Tektronix Phaser 350 600x300 if you have the printer’s Extended Features option.

Note If you are not sure which configuration of the printer you have, the printer’s startup page lists this information under Extended Features: Yes/No. See page 2-29 for instructions on printing a copy of the printer’s startup page.

10.Select the port your printer is connected to, then click Next.

11.It is recommended that you use the default printer name shown under Printer name. Click Yes if you want this printer to be the default printer. Then click Next.

User Manual

2-35

Page 51
Image 51
Tektronix Phaser 350 manual Cd-Rom