Tektronix Phaser 350 manual Windows timeout From DOS and Windows, Mode LPT1,,P

6Troubleshooting

Windows timeout: From DOS (and Windows 3.1)

Note To use this procedure, the printer must be connected directly to your computer, not on a network.

1.At the DOS prompt, issue the DOS MODE command by typing the following:

MODE LPT1:,,P

2.Start Windows 3.1.

3.Open the Control Panel from the Main menu.

4.Double-click the Printers icon to open the Printers dialog box.

5.Click the Connect button to open the Connect dialog box.

6.Change the port selection from LPT1 to either LPT1.DOS or LPT1.OS2, depending on the options you see in the dialog box.

7.Click OK.

6-30Phaser 350 Color Printer