Tektronix Phaser 350 manual Cleaning for ink smears paper-exit path

Caring for Your Printer 5

Cleaning for ink smears: paper-exit path

Approximate time to complete: 10 minutes

If you have already performed the other “Cleaning for ink smears” procedures described earlier in this chapter but problems persist, you should manually clean the paper-exit path. Refer also to “Cleaning for jams and ink smears: paper-feed rollers” on page 5-19.

Occasionally, stray ink particles become attached to the exit fingers, rollers and guides under the exit cover causing ink streaks or marks on the top edge, front or back of prints. When this occurs, you must clean these parts using both dry and alcohol-soaked swabs. Refer to “Using isopropyl alcohol” on page 5-12 for more information.

Sample ink smear: paper-exit path

9101-62

User Manual 5-25