Tektronix Phaser 350 manual Unlocking the transit restraint

2Getting Set Up

Unlocking the transit restraint

Caution To avoid damaging the printer, always turn the printer power off using the On/Off switch before locking or unlocking the transit restraint.

1.Turn the printer power off using the rear-panel On/Off switch.

2.The transit restraint lock is located on the right side of the printer. Insert a wide flat-blade screwdriver into the lock slot.

3.While pushing inward with slight pressure, turn the lock button counterclockwise until it springs out flush with the side of the printer.

3

2

9101-03

Caution If you move or ship the printer, be sure to lock the transit restraint to protect the printhead from damage. Refer to “Moving Your Printer” on page 5-39 for more information.

2-10Phaser 350 Color Printer