Tektronix Phaser 350 manual Installing the maintenance tray

Getting Set Up 2

Installing the maintenance tray

The printer is shipped with a maintenance tray that must be installed before printing is possible. The front panel displays a message telling you when the maintenance tray is low, allowing you to make a limited number of prints before the tray is depleted. To avoid printing delays, always keep an extra maintenance tray available for use in the printer.

Note When you reorder a replacement maintenance tray for the printer, use Tektronix order number 436-0294-03.

1.Open the front cover.

9101-65

2.Open the maintenance tray shipping box and remove the maintenance tray.

User Manual 2-11